TANDBERG 6000MXP user manual Data port, Signal name Direction Pin Number

TANDBERG 6000 MXP Profile

5.1.4Data port

The data port(s) are implemented as Data Communications Equipment (DCE). The connector used are female 9-pin D-subs.

The TANDBERG main camera is normally connected to data port 2 and pin number 4 provides 12V DC / 1 Amps to the main camera. Otherwise the pin-outs for both data ports are the same.

Signal name	Direction	Pin
		number
Carrier detect, CD	From	1
	DCE
Receive data,	From	2
RXD	DCE
Transmit data,	To DCE	3
TXD
Data terminal	From	4
ready, DTR	DCE
Signal ground,		5
GND
Data set ready,	From	6
DSR	DCE
Ready to send,	To DCE	7
RTS
Clear to send,	From	8
CTS	DCE
Ring indicator, RI	From	9
	DCE

230