TANDBERG 6000MXP Standby, To turn on the standby mode manually, How to turn off the standby mode

TANDBERG 6000 MXP Profile

3.8 Standby

The system will automatically go to Standby mode when it is not in use. In standby mode, the screen(s) are black. It is however still possible to receive incoming calls.

How		to turn on the standby mode manually:
		Select Standby from the menu and select Standby Now, or
		Press the End Call button on the remote control twice.
How to turn off the standby mode:
		When the system is in standby, pick up the remote control, or press any of its keys to
		activate the system again.
The standby mode of the system should be used if the system is to be left idle.

Note! Standby is not activated by switching off the monitor(s) (if possible to switch off individually).

It is possible to postpone the system from entering standby mode for 1 hour or 3 hours, see Delay Standby for 1 hour and Delay Standby for 3 hours.

54