TANDBERG 7000 user manual Presets, Selecting presets, Storing presets, Storing preset 10 to

TANDBERG Videoconferencing System General use

Presets

The preset buttons enable you to pre-store up to ten different settings. Each preset is able to store:

•Video source

•Camera position, pan/tilt/zoom/focus/brightness (if Main Camera)

•Audio source selection (see ‘Audio Settings’ in ‘Advanced use’)

Selecting presets

P1 P2 P3 To select a pre-stored camera position, audio and video source, use the keys P1 P2 P3 or press P until the on-screen indicator ‘Preset 0-9’appears and use 0-9 to activate P0-P9 presets. To exit ‘Preset’ mode, press OK.

P1-P3 are the same presets as when pressing P and then a number key 1-3.

Storing presets

To store the current camera position, audio and video source:

store •	Press STORE once and wait for the on-screen indicator to appear.
•	Then press one of the keys P1 P2 P3 or a number key 0-9.
Storing preset 10 to 15
To store preset 10-15 the TANDBERG Tracker has to be used:
				F	0	1
		D	E			2
• Select which preset to be used on the TANDBERG Tracker (see separate documentation).						3
			A9		8	4
						76
		C				5
		B

•Press STORE once on the TANDBERG Remote Control and wait for the on-screen indicator to appear.

•Then press the ‘single person’ button on the TANDBERG Tracker.

See the Tracker section in ‘Peripheral Equipment’ for more information about the TANDBERG Tracker.

37