TANDBERG 7000 user manual VGA Settings, VGA Out Quality

TANDBERG Videoconferencing System Advanced use

VGA Settings

NOTE IF YOU SET ‘VGA OUT’ TO ‘MAIN’, MAKE SURE

YOU HAVE A VGA-MONITOR CONNECTED TO THE

VGA-OUTPUT ON THE SYSTEM. IF YOU DO NOT

HAVE A VGA-MONITOR CONNECTED, YOU WILL

NOT BE ABLE TO SEE THE MENU SYSTEM!

NOTE ICIF WILL NOT BE AVAILABLE WHEN VGAOUT IS

MAIN OR DUAL.

VGA Out

To enhance the local video quality, a VGA monitor may be connected.

Main: Should be used if you want to use a VGA monitor as your main monitor. Video outputs 1 and 3 will be disabled.

Dual: Should be used if you want to use a VGA monitor as your dual monitor. Video outputs 2 and 4 will be disabled.

Loop: Should be used if you want to use a TV monitor as your main monitor.

VGA Out Quality

VGA Out Quality changes the resolution of the VGA signal available on the ‘VGA Out’ connector at the rear of the codec.

Auto: Will sense the resolution on the ‘VGA input’ port and use the same resolution on the ‘VGA Out’ port.

VGA: Will force ‘VGA out’ to VGA(640X480).

SVGA: Will force ‘VGA out’ to SVGA(800X600).

XGA: Will force ‘VGA out’ to XGA(1024X768).

71