Advanced call quality | TANDBERG 7000 instruction

TANDBERG Videoconferencing System

Advanced use

Advanced call quality

NOTE

THE ‘AUTO’ SETTINGS ARE RECOMMENDED CHOICES FOR MOST CASES. THE OTHER AUDIO, VIDEO AND RESOLUTION SELECTIONS MADE IN THIS MENU WILL OVERRIDE THE SELECTIONS MADE IN THE ‘CALL QUALITY’ MENU AND ARE NOT RECOMMENDED TO BE CHANGED FOR NORMAL USE.

	Audio	The setting of ‘Audio: Auto/High/Normal’ in ‘Call Quality’ will be used.
	Auto
	G.722.1	Compressed high quality audio (7 kHz).
	G.722	High quality audio (7 kHz).
	G.728	Compressed normal quality audio (telephone quality, 3.1 kHz).
	G.711	Normal quality audio (telephone quality, 3.1 kHz).
	Off	No audio is transmitted.
	Off	No audio is transmitted.				RESOLUTION, AUTO FUNCTIONALITY
				TIP		RESOLUTION, AUTO FUNCTIONALITY
	Video					(IF SUPPORTED BY FAR END):
	Video					WHEN ‘VIDEO: MOTION’ :
	Auto	Optimized video quality depending on available bandwidth.				WHEN ‘VIDEO: MOTION’ :
	Auto	Optimized video quality depending on available bandwidth.				LOW BANDWIDTHS: CIF, SIF
	H.264**	Bandwidth efficient video compression and decompression.				LOW BANDWIDTHS: CIF, SIF
	H.264**	Bandwidth efficient video compression and decompression.				HIGH BANDWIDTHS: ICIF,ISIF
	H.263	Normal video compression and decompression.				WHEN ‘VIDEO: SHARPNESS’ :
	H.261	Legacy video compression and decompression.				4CIF, 4SIF, VGA, SVGA, XGA
	Off	No video is transmitted.
	Off	No video is transmitted.
	Resolution	The setting of ‘Video: Auto/Motion/Sharpness’ in ‘Call Quality’ will be used, see tip above.
	Auto
	4CIF	Digital Clarity (704 x 576 pixels), only for H263.
	CIF	High resolution video (352 x 288 pixels).
	QCIF	Low resolution video (176 x 144 pixels).
	H.331
	Off	Standard two-way communication with quality negotiation between both sides.
	On	Used when broadcasting a video conference from one site to many others, e.g. via satellite,
		where there is no possibility to negotiate quality between the receivers and the originator due to
		one-way communication.
	Status Format
		Provides call quality feedback on the status line.
	Auto	Video off/on, Audio off/normal/high
	Advanced	Shows video/audio standards (Example: Video: H261 CIF, Audio: G722).

51

Image 51

TANDBERG 7000 user manual Advanced call quality

Contents

Page Solving after-image lagging problems After image lagging due to remaining electrical loadAfter-image lagging due to sticking Trademarks and copyright Equipment Markings Operator Safety Summary Contents Advanced use Peripheral Equipment 103Appendices 112 Index 123 Introduction Main Menu Menu structure At a glance the Tandberg 7000 system Tandberg 7000 Videoconferencing System V.E. II Camera MonitorsCodec Remote control Tandberg Natural Audio Module Table microphone Unpacking and mounting Precautions Unpacking and mounting of the base Column and Foot Lift the monitor frame out of the transport case Unpacking and installing the monitor frame Namii Audio Module audio cable Connecting cablesPower cable Microphone cable LAN cable 5a. Isdn cables using BRI interface5b. Isdn cable using the PRI interface 5c. Other networks using the External Network interface Monitor back cover ‘Terminal Settings’, ‘Software Options’ System configuration Isdn configuration LAN configuration Welcome menu System start-up Basics LAN call Making and ending callsMaking a call Isdn call Using sub-address / extension address / MCU password Access Code Dialing TWO Numbers Selecting / setting default quality bandwidth Selecting / setting default network Answer a call End a callCorrecting keying mistakes Press D Irectory to bring up the following menu Directory Delete Entry Add New EntryEdit Entry Delete Entry Add Site Add MultiSite Entry Adjusting volume View outgoing video selfviewMicrophone on/off On Screen Symbols Do Not Disturb / Sleep Mode Moving / zooming camera Focusing cameraControlling the Main Camera Selecting video sources Deactivating SetupVoice Activated Camera Positioning Activating Storing preset 10 to PresetsSelecting presets Storing presets Main cam Aux Doc cam Vcr Far end camera control Fecc Receiving a snapshot Sending and receiving snapshotsSending a snapshot Viewing a snapshot Add Duo Video Duo Video End a Duo Video call LAN 3MB MultiSite MCU MultiSite cascading Establishing MultiSite meetings using Directory Press C Onnect Adding an extra site dial out Adding an extra site dial Disconnecting sites from a conference PC SoftPresenter PC Presenter Web-interface Press MENU, select ‘Terminal Settings’, ‘LAN Settings’ Text Chat / Closed Captioning StreamingSnapshots Main menu Menu Password Call quality Advanced call quality Duo Video Quality Presentation ModeDuo Video Mode Presentations Snapshot Filter Duo Video NumberDuo Video / Snapshot Source Auto-Display Snapshot Dual Monitor UtilitiesAutoanswer Far end camera control MCU status line Auto-PIPWelcome Menu Continuous Presence Web Snapshots MCU services When connected to an MCU When MultiSiteQuick Menu View site # Request floorRelease floor Terminal Names Chair control Audio Inputs Audio Settings Level Settings Mix Mode Audio Outputs Level Settings Outputs Noise Reduction Echo Control Motion Room Size Tips for improving the echo canceller performance Automatic Gain Control AGC Settings Key Tones Alert Tones & VolumeRestore Audio Defaults Alert Speaker Video Settings Camera Tracking ModeDocument Camera Whitebalance Monitor SettingsFocus Camera Brightness Video Name VGA Settings VGA OutVGA Out Quality Address VNC SettingsPassword Start using VNC Network Configuration Terminal SettingsPage Isdn switch type ISDN-BRI Settings Line setup Advanced Isdn settings Subaddress Sending Complete MSN Multiple Subscriber NumberParallel dial Send Own Numbers ISDN-PRI Settings PRI Switch TypeNumber Search Channel Hunting Max ChannelsLow Channel High Channel Advanced Isdn Settings Line Settings Advanced ISDN-PRI Settings Start Channel Leased E1/T1 SettingsCall Control Network Interface External network settings Network clocking Cable Specification LAN Settings Address PortTTL/Router Hops Announcements How to view streamingStreaming Source Allow Remote Start Settings Advanced H.323 Settings NAT AddressPorts Diffserv IP Type of Service TOSQoS Type IP Precedence IP-subnet mask IP SettingsIP-assignment IP-address Snmp Trap Host Snmp SettingsEthernet Speed Restart Incoming telephone calls Call SettingsAccess Code Incoming MCU calls Encryption Secure Conference Encryption Mode Network Profiles Max Call Length Dataport configuration Dataport Language Software OptionsFollowing options are available Diagnostics System infoChannel status Most common cause codes for Isdn are Cause codes Call status Restore defaults Far End Loop Isdn only View current settingsTest subsystem IP Address Conflict Check Interfaces Peripheral Equipment Audio Outputs Video InputsVideo Outputs Audio Inputs Set ‘VGA Out Dual’ in ‘VGA Settings’ menu Dual MonitorSet ‘Dual Monitor On’ in ‘Utilities’ menu Document camera Multiple controllable cameras Tracker AudioScience microphone Video Cassette Recorder VCR VCR PlaybackVCR Recording Extra fixed cameras Telephone Add-On Additional microphones Appendices Using Telesync TS-256 SW56/ISDN adapter Appendix 2 Connecting the system to the Switched 56 network Using CSU adapter Appendix 3 Connecting the system to PRI/T1 Background Loudspeaker volumeAppendix 4 Environmental considerations Iris control and lighting How to prepare a typical room for videoconferencing Guidelines for setting up videoconferencing rooms Description of the different files Appendix 5 Using the file system Custom logos Appendix 6 Security Access Code Streaming password Encryption Appendix 7 Declaration of Conformity Index Index Tandberg Videoconferencing System 125