TANDBERG Videoconferencing System | General use |
|
|
End a Duo Video call
disconnect To end a Duo Video call, press DISCONNECT. Select if you want to disconnect only the Duo Video connection or the whole connection.
Controlling camera, changing video source, presets in a Duo Video call
The main monitor will always display incoming video. The 2nd monitor will display outgoing video (Duo Video in full screen / Main local video in PIP).
Pressing SELFVIEW will toggle Duo Video full screen / Main source in PIP and vice versa. Pressing SELFVIEW will not change anything on the main monitor in a dual monitor setup.
Pressing MOVE PIP will move PIP only on the 2nd monitor in a dual monitor setup.
Controlling the camera, changing video source and using presets will affect the video source currently displayed in full screen mode.
EXAMPLE: IF DUO VIDEO IS SHOWN IN FULL SCREEN ON THE 2ND MONITOR, PRESSING ANY OF THE VIDEO SOURCE BUTTONS WILL CHANGE DUO VIDEO SOURCE. IF THE MAIN CONNECTION IS SHOWN IN FULL SCREEN, PRESSING ANY OF THE VIDEO SOURCE BUTTONS WILL CHANGE THE MAIN CONNECTION SOURCE.
If both connections are selected to display the same video source, Duo Video will be closed.
NOTE
IN ORDER TO SHOW DUO VIDEO PRESENTATIONS WITH SUPERIOR QUALITY, THE VGA INPUT ON THE PLASMA MONITOR WILL BE ACTIVATED WHEN DUO VIDEO IS ACTIVE.
41
