Tandberg DataOverview
_____________________________________________________________
1.2.Features of Viking FS-1600 Series NAS Appliance
The Viking FS-1600 Series Network Attached Storage appliance is a powerful rack-mountable system that offers a new standard for flexible management and monitoring networked attached storage by the network administrators. The hardware features include the followings:
•Processor:
oViking FS-1600 uses dual 771-pin LGA Sockets that supports 2 x 64-bit Dual-Core Intel® Xeon® 1.60 GHz processor with 1066 MHz FSB and 4MB L2 Cache (5110)
oFor Viking FS-1610 uses dual 771-pin LGA Sockets that supports 1 x 64-bit Quad-Core Intel® Xeon® 2.00 GHz processor with 1333 MHz FSB and 12MB L2 Cache (E5405)
•Intel 5000V (Blackford VS) chipset
•2 x Intel® (ESB2/Gilgal) 82563EB Gigabit Ethernet Controller which supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output with Intel® I/OAT for fast, scaleable, and reliable networking
•Memory:
o6 x 240-pin DIMM socket that accept a maximum memory capacity of 16GB 667 / 533 MHz DDR2 ECC FB SDRAM modules (Memory modules must be populated in pairs)
oDefault RAM configuration for FS-1600 is 1GB and FS-1610 is 2GB
•Expansion slots:
o1 x (x8) PCI-e slot
o1 x (x4) PCI-e slot (using x8 slot)
o2 x 64-bit / 100 MHz PCI-X (3.3V) slot
o1 x 32-bit / 33 MHz PCI (3.3V) slot
•RAID:
oFS-1600 uses Areca ARC-1160 Serial-ATA II RAID controller with 256MB RAID cache which supports RAID level 0, 1, 0+1, 3, 5 and 6 (consume one PCI-X slot)
oFS-1610 uses Areca ARC-1261ML Serial-ATA RAID controller with 256MB RAID cache which supports RAID level 0, 1, 0+1, 3, 5 and 6 (consume one x8 PCI-e slot)
•Storage support for:
oUp to 16 x hot-swap Serial-ATA II hard-drive bays
oUp to 16 x hard-drive with RAID configuration
•Front control panel
oPower button
oReset button
o1 x Fast UART 16550 serial port o 2 x USB 2.0 port