Tandberg Data Customizing the Viking
_____________________________________________________________
4.2.1.Built-in Networking
The
1.Connect an Ethernet cable from a LAN port (LAN0 or LAN1) on the rear of the
2.See your operating system user guide for information on how to configure your network settings.
4.2.2.USB Connection
The USB (Universal Serial Bus) port is a
4.3.Upgrading Storage Capacity
The Viking
One of the key components of the
The
Warning
Because all hard drives have different cooling power and vibration characteristics, specific hard drive types have been validated to be compatible with the NAS. For more information, contact Technical Support.
4.2.2.Removing/Installing Hot-Swap Hard Drive
1.Identify the defective hard drive by reading the drive LEDs on the front panel. A defective drive LED does not light up. For information about the location of the drive status indicators, see “Front Panel Indicators”.
2.Unlock the front bezel cover by inserting the supplied key into the lock and turning it counterclockwise until it points to the unlocked icon.
Tandberg Viking |