Tandberg Data FS-1600, FS-1610 user manual Connecting Cables, Tandberg DataSetting Up

Tandberg DataSetting Up

_____________________________________________________________

10.Once the rail assemblies are securely installed on the rack, align the FS-1600 Series inner rails with the grooves of the outer rail assemblies on the rack. Gently push the FS-1600 Series chassis inward till it fit nicely into the rack.

11.Secure the FS-1600 Series to the rack by tightening the screws on the front sides of the FS-1600 Series chassis.

2.4.Connecting Cables

Peripherals such as monitor, keyboard and mouse can be connected to the FS-1600 Series NAS appliance for direct administration. It is recommended to connect them when powering the appliance for the first time to ensure that hardware is functioning properly.

1.Connect the VGA monitor cable into the monitor/VGA port located on the rear panel of the FS-1600 Series NAS appliance.

2-9 Tandberg Viking FS-1600 Series NAS Hardware User Manual