Tandberg Data FS-1610, FS-1600 user manual Troubleshooting, Tandberg DataSetting Up, 2-10

Tandberg DataSetting Up

_____________________________________________________________

2.Connect the PS/2 keyboard and mouse into the PS/2 keyboard and mouse ports on the rear panel of FS-1600 Series NAS appliance.

Notes

If USB keyboard and mouse are used, they can be connected on the rear panel of the FS-1600 Series NAS appliance.

3.Connect the power cord to the power connector located on the rear panel of the FS-1600 Series NAS appliance and connect the other end of the power cable to a power outlet.

2.5.Turning ON the Viking FS-1600 Series NAS Appliance

After making sure that you have set up the FS-1600 Series NAS appliance correctly and connected all the required cables, you can turn on you can turn on the appliance.

1.Press the power button. The FS-1600 Series NAS appliance starts and displays a welcome message. After that, a series of power-on self test (POST) messages appear. The POST messages indicate whether the appliance is running correctly.

2.If the appliance does not turn on or boot after pressing the power button, go to the next section for the possible cause of the boot failure.

3.Aside from the POST messages, you can determine if the NAS is in good condition by checking if the following occurred:

oPower indicator on the front panel is green.

oNum Lock, Caps Lock, and Scroll Lock LEDs on the keyboard are on.

Notes

The default login and password for Windows Storage Server 2003 is “Administrator” and “1234”.

2.6.Troubleshooting

If the FS-1600 Series NAS appliance does not boot after you turn it on, check the following factors that might have caused the boot failure:

•The external power cable may be loosely connected. Check the power cable connection from the power source to the power cable connector on the rear panel. Make sure that the cable is correctly connected to the power source and to the power cable connector.

2-10 Tandberg Viking FS-1600 Series NAS Hardware User Manual