Tandberg Data FS-1610, FS-1600 user manual Locking Tabs, Tandberg DataSetting Up

Tandberg DataSetting Up

_____________________________________________________________

Locking Tabs

1

2 3

4.Secure the inner rail to the FS-1600 Series chassis with Type G screw and repeat step 1 to 4 for the left rail on the chassis. (Refer to section 2.3 Rack Installation: Content for Accessory Kit for Type G screw.)

5.In the remaining package, locate the pair of outer rails and REAR brackets.

6.Secure the FRONT bracket of the outer rail with 2 x Type G screws. Slide the outer rail through the 2 buttons and attach the REAR bracket.

7.Measure the depth of your rack and adjust the length of the rail by sliding the bracket accordingly.

8.Repeat step 5 to 7 for the left outer rail.

9.Once the outer rail assemblies are built, they are ready to be installed on a rack. Use the Type I washer and Type H screw to secure the rail assemblies to a rack.

2-8 Tandberg Viking FS-1600 Series NAS Hardware User Manual