Tandberg Data FS-1610 Tandberg Data Customizing the Viking FS-1600Series NAS Appliance

Tandberg Data Customizing the Viking FS-1600 Series NAS Appliance

_____________________________________________________________

3.Remove the front bezel by pressing the release latch on right side of the front bezel, then pulling out the bezel.

4.Remove the defective hard drive by raising the hard drive carrier handle, then sliding the hard drive carrier out of the bay.

5.Install a new drive into the hard drive carrier. Make sure that the new hard drive is the same drive size as the failed hard drive.

6.Insert the hard drive carrier into the bay and lock it into place.

7.Replace the front bezel, then lock the control bay cover. The new hard drive’s status LED lights up. The RAID will rebuild automatically.

4-3 Tandberg Viking FS-1600 Series NAS Hardware User Manual