15 − Appendix
MIDI Control/Program change message
The following are the MIDI Control Change messages accepted by the 2488neo to control different settings. When used with an external sequencer, this provides a cer- tain degree of automation for mixing, etc.
Mixer Control Change parameters
The Bank Select controller is used with channel 15 to choose which group of eight channels or inputs are affect- ed. It is therefore necessary to send a MIDI message of BE 00 XX (where XX selects the group of eight channels or inputs) before sending the Control Change messages on the appropriate MIDI channel.
Bank 0: Mixer channels 1 though 8
Bank 1: Mixer channels 9 through 16
Bank 2: Mixer channels 17 through 24
Bank 3: Inputs A through H
Once the group has been selected, use MIDI channels 1 through 8 to control the mixer channels or inputs or MIDI channel 16 for the stereo master or send master).
MIDI channel |
| 16 | |||
|
|
|
| ||
| Mixer/Input channel | STEREO/MASTER | |||
|
| ||||
|
|
|
| ||
Control Change | Parameter | Values |
| ||
Number |
|
|
|
| |
7 | Internal Level | 0 | - 127 (0= |
| |
|
|
|
|
| |
10 | Pan | 1 | = L63, 64 = Center, 127 = R63 | — | |
|
|
|
| ||
11 | Attenuation | 0 | – 8 = | ||
| |||||
|
|
|
|
| |
16 | Low Freq | 0 | – 31 = 32, 40, 50, 60, 70, 80, 90, 100, 125, 150, 175, 200, 225, 250, 300, 350, 400, | ||
450, 500, 600, 700, 800, 850, 900, 950, 1.0k, 1.1k, 1.2k, 1.3k, 1.4k, 1.5k, 1.6k (Hz) | |||||
|
| ||||
|
|
|
|
| |
17 | Low Gain | 0 | – 24 = |
| |
|
|
|
| ||
|
| 0 – 63 = 32, 40, 50, 60, 70, 80, 90, 100, 125, 150, 175, 200, 225, 250, 300, 350, 400, | |||
18 | Mid Freq | 450, 500, 600, 700, 800, 850, 900, 950, 1.0k, 1.1k, 1.2k, 1.3k, 1.4k, 1.5k, 1.6k, 1.7k, | |||
1.8k, 1.9k, 2.0k, 2.2k, 2.4k, 2.6k, 2.8k, 3.0k, 3.2k, 3.4k, 3.6k, 3.8k, 4.0k, 4.5k, 5.0k, | |||||
|
| ||||
|
| 5.5k, 6.0k, 6.5k, 7.0k, 7.5k, 8.0k, 9.0k, 10k, 11k, 12k, 13k, 14k, 15k, 16k, 17k, 18k (Hz) | |||
|
|
|
|
| |
19 | Mid Gain | 0 | – 24 = |
| |
|
|
|
|
| |
20 | Mid Q | 0 | - 6 = 0.25, 0.5, 1, 2, 4, 8, 16 |
| |
|
|
|
| ||
|
| 32 – 63 = 1.7k, 1.8k, 1.9k, 2.0k, 2.2k, 2.4k, 2.6k, 2.8k, 3.0k, 3.2k, 3.4k, 3.6k, 3.8k, | |||
21 | High Freq | 4.0k, 4.5k, 5.0k, 5.5k, 6.0k, 6.5k, 7.0k, 7.5k, 8.0k, 9.0k, 10k, 11k, 12k, 13k, 14k, 15k, | |||
|
| 16k, 17k, 18k (Hz) |
| ||
|
|
|
|
| |
22 | High Gain | 0 | – 24 = |
| |
|
|
|
|
| |
23 | LOOP Effect Level | 0 | – 127 (0= | (MASTER LEVEL) | |
|
|
|
|
| |
24 | EFFECT1 Level | 0 | – 127 (0= | (MASTER LEVEL) | |
|
|
|
|
| |
25 | EFFECT2 Level | 0 | – 127 (0= | (MASTER LEVEL) | |
|
|
|
| ||
80 | EQ SW | 0, 1 = OFF, ON |
| ||
|
|
|
| ||
81 | LOOP Effect Pos | 0, 1 ,2 = OFF, PRE, POST |
| ||
|
|
|
| ||
82 | EFFECT1 Pos | 0, 1, 2 = OFF, PRE, POST | — | ||
|
|
|
| ||
83 | EFFECT2 Pos | 0, 1, 2 = OFF, PRE, POST | |||
| |||||
|
|
|
| ||
84 | Phase | 0, 1 = N, R |
| ||
|
|
|
|
| |
104 TASCAM 2488neo
