Tascam 2488neo owner manual No. Message Meaning Action

15 − Appendix

No. Message		Meaning	Action
	Time between IN	Repeat playback or auto-punch operations	Press NO/EXIT, and re-enter or edit the IN and
	and OUT is too	cannot be carried out because the time between OUT points so that the time between them is
27	short. Re-set	the IN and OUT locate markers is too short.	longer, before attempting the operation again.
	the points.
	Press [EXIT].
	Too many locate	More than 999 markers have been set in the	Press NO/EXIT, and use the DELETE key
	markers. Use	song and so a new marker cannot be entered.	from the home screen to delete some of the
	DELETE MARK to		unwanted marks.

28delete some markers.

	Press [EXIT].
	Too many songs to	Copying a song has failed because there are	Press ENTER. Back up any songs you want
	continue with this	too many songs already on the selected or	to keep, and then use the ERASE menu item
29	operation.	target partition.	from the SONG menu to erase unwanted
			songs, or songs you have backed up before
	Press [ENTER].		proceeding with the song copy (deleting songs
			cannot be undone).
	Too many songs.	There are too many songs stored on the current	Press NO/EXIT. Back up any songs you want
	Use SONG ERASE	partition (the limit is 250 songs on one partition)	to keep, and then use the ERASE menu item
	to delete songs	for a new song to be created, or a song that has	from the SONG menu to erase unwanted
30	you don’t need.	been backed up to be restored.	songs, or songs you have backed up before
			proceeding with the creation or restoration of
	Press [EXIT].		a song (deleting songs cannot be undone).
			Alternatively, use DISK -> SELECT to select
			another partition.
	Too many takes.	The repeat auto-punch procedure can’t	Press NO/EXIT, stop recording, select the
	Can’t continue	continue because more than 99 takes have	desired take from the list. Press ENTER and
31	recording	been recorded.	press AUTO PUNCH again, selecting a mode
			other than LAST TAKE LOAD. Takes recorded
	Press [EXIT].		before this cannot be restored, so the first
			selection should be made carefully!
	Track already	Because at least one track is already present on Press NO/EXIT and replace the disc if necessary.
	written to disc	the disc, it is not possible to burn more than one
32	so only 1 song	track at once. To burn several tracks at one time
	can be written.	(Disc At Once), you must start with a blank disc.
	Press [EXIT].
	Track is too	The mixdown function cannot be applied	Using the mixdown function a master track
	short. Choose	because the recording range for the master	can be recorded from 00:00:00:00 to the OUT
	and set another	track has not been set or the length is shorter	point.
	OUT point.	than allowed.	The OUT point can be set by pressing the OUT
33			key while holding down the LOCATE key.
	Press [EXIT].		Moreover, a master track must be at least 4
			seconds long in order to burn it to a CD. Set
			the OUT point to 00:00:04:00:0 or later (the IN
			point is not effective when using the mixdown
			function).
	Wrong type of	The wrong type of CD for the operation has	Press NO/EXIT and replace the disc with the
	CD. Check the	been loaded in the drive. This could be because	correct type of disc for the operation.
	disc.	: A non-writable CD has been selected for writ-
34		ing. An attempt has been made to finalize an
	Press [EXIT].	already finalized disc. An attempt has been
		made to erase a non-CD-RW disc. A disc which
		is not a backup disc has been loaded for a
		restore operation.

120 TASCAM 2488neo