Tascam 2488neo owner manual Song Protect

			15 − Appendix
No.	Message	Meaning	Action
	No tracks have	Before an auto-punch operation, you must have	Press NO/EXIT and press the REC key of at
	been armed. Arm	at least one armed track.	least one track on which you will be recording
18	at least one		(once a track has been armed in auto-punch,
	track.		the track arming status cannot be changed).
	Press [EXIT].
	Non-linear	Digital audio input mode has been selected,	Press NO/EXIT and check the digital audio
	audio detected.	but the 2488neo has detected the wrong data	source. The 2488neo expects a signal in S/
19	Check your	format for the incoming digital audio to be used.	PDIF (IEC60958 Consumer use) format at
	system set-up		44.1 kHz. It cannot accept compressed audio
			formats, etc.
	Press [EXIT].
	Not enough free	Copying a song has failed because there is not	Press NO/EXIT and use one of the SONG
	disk space. Use	enough space on the selected or target partition.	menu operations such as DELETE UNUSED or
20	DELETE UNUSED		ERASE to free up some space on the partition
	to make space.		where there is not enough space (these opera-
			tions cannot be undone).
	Press [EXIT].
	Not enough free	Sometimes after repeated operations, the inter-	Press NO/EXIT. Use the DELETE UNUSED
	memory. Use	nal memory of the 2488neo becomes used, and	menu item from the SONG menu. As well as
21	DELETE UNUSED	recording, etc. is not possible.	deleting the unused song data, this action
	to free memory.		will also free up memory, so recording can
			continue. Remember that this operation
	Press [EXIT].		cannot be undone.
	Not enough room on	Too much data has been selected to fit onto the	Press YES/ENTER to change the CD for
	CD for burn. Use	CD that is currently loaded.	another one, or NO/EXIT to cancel the current
22	another CD [YES]		operation. Use a higher-capacity disc when
	or cancel [NO].		burning a master track or exporting data, or
			one of the same capacity as the current disc
			when backing up.
	Not enough room	No enough space on the hard disk to create the	Press NO/EXIT and create space by deleting
	on hard disk for	image file necessary to create a CD.	songs, etc., (SONG->ERASE) backing them up
23	this operation.		if necessary (this operation cannot be undone).
			You can free up space on a partition other than
	Press [EXIT].		the current partition (use the DISK->SELECT
			function) in order to create space for the image.
	Protected song.	Recording, track editing, recording, titling, etc.	Press NO/EXIT, and use the PROTECT menu
	Unprotect with	cannot be carried out when the current song	item from the SONG menu to remove the
24	SONG PROTECT.	has been protected.	protection from the song before proceeding.
	Press [EXIT].
	Repeat mode is	Because repeat mode is selected, the following	Press NO/EXIT and cancel the repeat mode
	selected.	functions cannot take place: locate operation,	(REPEAT key) before proceeding with the
25	Cannot do this	track editing, undo/redo, auto punch, quick	operation that produced this message.
	operation now.	routing, all menu operations, and shutdown.
	Press [EXIT].
	SSA mode is	Because SSA mode is selected, the following	Press NO/EXIT and cancel the SSA mode
	selected.	functions cannot take place: MTC slave opera-	(PITCH/SSA key) before proceeding with the
26	Cannot do this	tions, jog and trim functions, recording (includ-	operation that produced this message.
	operation now.	ing auto-punch) and digital input.
	Press [EXIT].

TASCAM 2488neo 119