Tascam 2488neo owner manual Question Answer

		16 − FAQ
No.	Question	Answer
	I connected the unit with a USB cable to a	You must turn the USB function ON in order to make it possible for
	computer, but the computer does not recognize	a computer to recognize the 2488neo connected by USB. Press
12	it.	the MENU key, select “DISK” and press the YES/ENTER key. Then,
		select “USB OPEN/CLOSE” and press the YES/ENTER key to turn
		the USB function ON (see “Opening the USB connection” on page
		81 for details).
	I changed the volume with the faders while	The faders do not adjust recording levels; they adjust monitoring
	recording, but the volume is still the same when	levels for the recording sources. Even if you adjust the volume with the
13	I play it back.	faders, the recorded sound level is not changed. Use the TRIM knobs
		to adjust recording levels (See “Making the first recording” on page 26
		for details).
	When I press one channel SELECT key, the	If channels are linked, pressing a channel SELECT key will cause the
14	adjacent key also lights.	adjacent linked channel key to light also. Press both SELECT keys at
		the same time to remove the link. You can link two inputs in the same
		way (see “Linking channels” on page 33 for more details).
	When I turned the power ON the data I record-	If you turn the power OFF without following shutdown procedures,
	ed yesterday was gone.	recorded data is lost. Please follow the shutdown procedures before
15		turning the power OFF. If you press and hold the SHUT DOWN
		key at the upper right of the top panel, the “SHUT DOWN” pop-up
		opens. Press the YES/ENTER key to execute the shutdown. When
		“---COMPLETE--- Please POWER OFF” appears, turn the power OFF.
	Is it possible to export multiple tracks to WAV	Yes. Open the WAVE IN/OUT screen and choose USB EXPORT. Align
	files at the same time?	the cursor with a track that you want to export as a WAV file and press
16		the INSERT key to add a check mark to the right of the list. You can
		also remove a check mark by pressing the DELETE key. Add check
		marks to all the tracks that you want to export before executing the
		export (see “USB export (virtual tracks)” on page 84 for details).
	Is it possible to COPY or ERASE multiple songs	Yes. Open the SONG screen and select COPY or ERASE. Select a
	at the same time?	song and press the INSERT key to add a check mark to the right of
17		the list. You can also remove a check mark by pressing the DELETE
		key. All the songs with check marks will be subject to the COPY or
		ERASE operation.
	Is it possible to record using punch in and out	No.
	with mixdown?	The mixdown is an important process in the creation of a master
18		track, so recording is always conducted from the start of a song. We
		suggest that you use the track bounce function before mixdown to
		record a temporary stereo master and then use punch recording on
		this (see “Bouncing tracks” on page 58 for details).
	I sometimes hear a loud noise when the unit is	No, it is not broken.
	reading data from a CD. Is the unit broken?	In order to reduce the amount of time that it takes to read data from a
19		CD, the 2488neo reads CDs at up to 52X speed. You are hearing the
		sound of the CD revolving at high speed.

TASCAM 2488neo 123