Tascam 2488neo owner manual Midi Program Change messages, ªª Scene memory Program Change messages

					15 − Appendix
Effect	Effect	NRPN	Parameter	Values
chain #
		00 15	Attack	1	– 100 = 0.1 – 10.0 (Hz)
		00 16	Sense	0	– 100 = 0 – 100
4	Wah (WAH)	00 17	(reserved)
		00 18	(reserved)
		00 19	Switch	0, 1 = Off, On
		00 20	Time	0	– 1000 = 0 - 1000 (ms)
		00 21	Feedback	0	– 100 = 0 – 100
		00 22	Hi Damp	0	– 100 = 0 – 100
		00 23	Mix Level	0	– 100 = 0 – 100
5	Delay (DLY)	00 24	Type	0	– 6 = OFF, Normal. Pan, Stereo, FB Mod, Gate, Reverse
		00 20	Time-L	0	– 1000 (ms) *If type is Stereo only
		00 26	Time-R	0	– 1000 = 0 – 1000 (ms) *If type is Stereo only
		00 21	Feedback-L	0	– 100 = 0 – 100 *If type is Stereo only
		00 27	Feedback-R	0	– 100 = 0 – 100 *If type is Stereo only
		00 28	Threshold	0	– 100 = 0 – 100 *If type is Gate only

MIDI Program Change messages

The 2488neo can accept Program Change messages to select an effect and to change scenes. Before a Program Change message is sent for changing an effect, a Bank Select message must be sent to select whether an effect will be selected from the preset bank or from the user bank of memories. In each case, bank 0 corresponds to the preset memories, and bank 1 to the user bank.

Send the Bank Select messages (CC 0) on MIDI channels

1 through 8 for mic effects (see below), MIDI channel 9 for stereo dynamics, channel 10 for the single effect, and chan- nel 11 for the multi effect.

When selecting a mic effect, a Bank Select message should first be sent on channel 14 to select the group of eight channels or inputs out of which the channel is selected:

Bank 0: Mixer channels 1 though 8

Bank 1: Mixer channels 9 through 16

Bank 2: Mixer channels 17 through 24

Bank 3: Inputs A through H

The Program Change messages that are then valid are as follows (see the tables following for details of the preset values—the “user” messages correspond to the entry num- ber in the library):

Mic effects (preset) Program Change 0 to 3

Mic effects (user) Program Change 0 to 99 (maximum) Stereo dynamics effect (preset) Program Change 0 to 1

Stereo dynamics effect (user) Program Change 0 to 99 (maximum)

Single effect (preset) Program Change 0 to 6

Single effect (user) Program Change 0 to 99 (maximum) Multi effect (preset) Program Change 0 to 31 Multi effect (user) Program Change 0 to 99 (maximum)

ªª Scene memory Program Change messages

These are transmitted on channel 16. The Program Change message may be from 0 to 99.

TASCAM 2488neo 111