15 − Appendix
No. | Message | Meaning | Action |
|
|
|
|
| Import file not | The file selected (backup file, WAV file for | Press NO/EXIT, use the USB OPEN function |
| found. Use | import, or SMF) is not available. | to transfer the appropriate file to the FAT parti- |
9 | USB OPEN to |
| tion and then try importing again. |
import file. |
|
| |
|
|
| |
| Press [EXIT]. |
|
|
| Invalid Fs rate detect- | Digital audio input mode has been selected, but | Press NO/EXIT and check the digital audio |
| ed. Check | the 2488neo has detected the wrong sampling | source. The output should be 44.1 kHz (note |
10 | your system | frequency (Fs) for the incoming digital audio to | that some players output 48 kHz). A unit with |
be used. | varispeed (pitch control) may have varispeed | ||
|
|
| turned on, altering the sampling frequency from |
| Press [EXIT]. |
| 44.1 kHz. |
| Master track is | The master track is too short, and therefore | A master track must be at least 4 seconds |
| too short. Use | cannot be checked. | long in order to burn it to a CD. Set the OUT |
| MIXDOWN |
| point to 00:00:04:00:0 or later, then press the |
11 | to correct it. |
| MIXDOWN/MASTERING key and record a |
|
|
| master track using the mixdown function. |
| Press [EXIT]. |
| The OUT point can be set by pressing the OUT |
|
|
| key while holding down the LOCATE key. |
| MTC slave mode | Since the unit is currently slaved to external | Press NO/EXIT and use the menu system |
| selected. | MIDI timecode, the selected operation cannot | |
| Cannot do this | take place. Operations not possible in MTC |
|
12 | operation now. | slave mode include: pitch control and SSA, |
|
|
| repeat playback, |
|
| Press [EXIT]. | and trim as well as audio CD playback and |
|
|
| digital audio input. |
|
| No file for import | No WAV file for import has been discovered on | Press YES/ENTER to change the disc (use an |
13 | has been found. | the loaded CD. | ISO9660 formatted disc which contains audio |
Change CD [YES], |
| data with 44.1 kHz sampling frequency in WAV | |
| else press [NO] |
| format) or NO to cancel the operation. |
| No free hard | The hard disk is full, and the current operation | Press NO/EXIT and use one of the SONG |
| disk space, Use | has failed because it needs hard disk space. | menu operations such as DELETE UNUSED or |
14 | DELETE UNUSED |
| ERASE to free up some space (these opera- |
to make space. |
| tions cannot be undone). | |
| Press [EXIT]. |
|
|
| No LAST REC | Can’t use the last recording point for auto | Press NO/EXIT and set the IN and OUT points |
| point. Use | punch operations, as no recording has been | as the punch positions. Use the RHSL key to |
15 | done yet. | refine these points if necessary, by rehearsing | |
|
|
| takes without recording. |
| Press [EXIT]. |
|
|
| No locate | Because there are no mark points currently set, | Press NO/EXIT, and use the INSERT key from |
| markers have | a location command cannot be performed. | the home screen to add some mark points at |
16 | been set.Use |
| the appropriate positions. |
INSERT MARK. |
|
| |
| Press [EXIT]. |
|
|
| No master track | An audio CD cannot be made because there | In order to create an audio CD, master tracks |
| found. Use | is no song with a master track created by | for each song must be prepared in advance. |
| MIXDOWN | mixdown on the currently used partition. | Select a song that you want to master to a |
| to create one. |
| CD (MENU |
|
|
| setting the OUT point in advance, press the |
17 | Press [EXIT]. |
| MIXDOWN/MASTERING key to execute the |
|
|
| mixdown function and record a master track. |
|
|
| Moreover, to write multiple songs to a CD |
|
|
| together using Disc at Once (DAO), follow the |
|
|
| above procedures in advance for every song to |
|
|
| be written. |
118 TASCAM 2488neo