Tascam MD-CD1 owner manual Connections, Audio equipment

3 – Connections

Before connecting the MD-CD1 to other units, please read their operation manuals thoroughly to ensure proper connection. Turn the power on only after all connections have been made.

Audio equipment

Connecting analog audio equipment

Connect analog stereo amplifiers, mixers and record- ers to the analog line inputs and outputs. There are input terminals for the MD deck recording source and terminals for both the CD and MD outputs, as well as a COMMON output for the output signals of the CD deck, the MD deck, or both. Selection of either or both deck’s output signals can be performed on the SYSTEM sub-menu of the CD menu under the “COMMON?” option.

NOTE

•The optional LA-MC1 Balanced Analog Input/ Output Board can be installed to enable the MD- CD1 to be used in a balanced system.

•Connection cables are not supplied with this unit.

•Do not bundle the pin connection cords with the power cord as noise or diminished sound quality could result.

Connecting digital audio equipment

Digital stereo amplifiers, mixers and recorders can be connected through the optical digital input/output terminals.

Power source

This unit has been designed to operate on the speci- fied power voltage only. Do not plug the power cord into outlets of any other voltage.

10 TASCAM MD-CD1 Owner’s Manual