Tascam MD-CD1 Features and their functions-RearPanel, Rear Panel, 6ANALOG OUTPUTS - CD - COMMON

4 – Features and their functions—Rear Panel

zDISC, GROUP, TRACK display DISC lights up when the display master deck has a disc loaded and is stopped.

GROUP lights up when the display master is the CD deck and the Directory mode is on, or when the dis- play master is the MD deck and the group mode is on.

TRACK is indicated during playback or playback standby.

3CAPS, These light during title input to indicate either CAPS or Japanese character mode. In lower case letter mode, there is no indication.

4EOM This lights when the remaining track/ disc time is less than the EOM set value.

1Character display Disc information, track information, menu, message and operation status are displayed.

2 This lights when the Timer Play function is

on.

Rear Panel

H J K L :

5ANALOG INPUT MD Terminals The analog line input terminals for the MD deck are for RCA pin jacks. Rated input level is –10 dBV.

6ANALOG OUTPUTS – CD – COMMON

– MD Terminals The analog line output terminals are for RCA pin jacks. Rated output level is –10 dBV.

CD: Outputs the CD deck signal.

COMMON: Outputs CD and MD signals. During playback of both decks, the output signal depends on the “COMMON?” option setting on the SYSTEM menu.

MD: Outputs the MD deck signal. During playback, the playback signal is output; during input monitor- ing, the source signal is output.

8DIGITAL (OPTICAL) OUTPUTS – MD

– CD Terminals These are the digital output ter- minals (optical). The playback signals from the MD deck and the CD deck are output through their respective digital output terminals.

9CONTROL I/O (RS-232C) Connector

RS-232C compatible serial control from an external PC can be performed.

7DIGITAL (OPTICAL) INPUT Terminal

This is the digital input terminal for the MD deck.

TASCAM MD-CD1Owner’s Manual 15