14
Important: To the Operator Model 5454
Symbol Definitions
Tobet ter communicate in the International arena, t he
words on many of our operator switches and buttons
have symbols to indicate their functions. Your Taylor
equipment is designed with these Internat ional
symbols.
The following chart identifies the symbol definitions
used on the operator switches.
=ON/AUTO
=OFF
= WASH
=PUMP
=MIXLOW
= MIX OUT
Power Switch
When placed in the ON position, the power switch
allows “SOFTECH” control panel operation.
Reset Mechanism
The reset button is located in the upper, left corner of
the decorative plate. The reset protects t he beater
motor from an overload condition. Should an overload
occur, the reset mechanism will trip. To properly reset
the freezer, turn the power switch to the OFF position.
Press the reset button f irmly.P lace the power switch
in the ON position. Press the WASH keypad and
observe the freezer’s performance. O pen the side
access panel to check if the beater motor is t urning the
drive shaft in a clockwise (from operator end) direction
without binding.
If the drive shaft is turning properly, press the WASH
keypad to cancel the cycle. Press the AUTO keypad
to resume normal operation. If the reset mechanism
should trip again, contact your authorized Taylor
Distributor to resolve the problem.
Indicator Lights -Mix Low and Mix Out
When the MIX LOW light begins to flash, it indicates
that the mix tank has a low supply of mix and should
be refilled as soon as possible. When the MIX OUT
light begins to flash, it indicates that the mix tank has
an insufficient supply of mix to operate the freezer. At
this time, the AUTO mode is locked out and the freezer
shuts down. To initiatet herefrigeration system, add
mix to the tank and press the AUTO keypad. The
freezer will automatically begin operation.
Mix
When the MIX keypad is pressed, the light comes on,
indicating that the mix cabinetrefrigeration system is
operating. The mix refrigeration is controlled by t he
MIX keypad found on the control panel. By pr essing
the AUTO keypad, the MIX function is automatically
turned on. The MIX function cannot be cancelled
unless the AUTO mode is cancelled.
Wash
When the WASH keypad is pressed, the light comes
on, indicating beater motor operation. The AUTO
mode must be cancelled first to activat e the WASH
mode.