19
Model 5454 Operating Procedures
Insert the prime plug into the hole at the top of the
freezer door and push down.
Figure 13
Step 4
Install the freezer door. Position the freezer door on the
four studs on the front of the freezing cylinder. Install
the handscrews. Tighten them equally in a cri ss-cross
pattern to insure that the door is snug.
Figure 14
Step 5
Install the draw valves. Slide the three o-rings into the
grooves on each draw valve and lubricate the valve
where indicated in the illustration below.
Figure 15
Lubricate the inside of the freezer door spouts (t op and
bottom). Insert each draw valve from t hebotto m of the
door, until the slot in the draw valve comes into view.
Figure 16