E-DOC-CTC-20061027-0003v2.0
Eth Commands

264

eth bridge config
Modify/display the bridge configuration settings.
SYNTAX:
where:

eth bridge config [brname = <{bridge}>]

[age = <number{10-100000}>]

[filter = <{no_WAN_broadcast | none}>]

[vlan = <{disabled | enabled}>]

[precedencemap = <string>]

brname The name of a bridge instance
age A number between 10 and 100000 (seconds).
Represents the lifetime of a dynamically learned Medium Access
Control(MAC) address.
The default is 300.
OPTIONAL
filter The bridge filter to be applied for all Wide Area Network(WAN)
bridge ports.
Choose between:
>no_WAN_broadcast: broadcasts from the Thomson ST itself
to the WAN are filtered out, broadcasts from the LAN to the
WAN are still passed through
>none: no broadcasts are filtered out.
The default is no_WAN_broadcast.
OPTIONAL
vlan Enable or disable the use of the VLAN ID of the received VLAN
packets.
The default is enabled.
OPTIONAL
precedencemap The IP QoS precedence mapping table OPTIONAL