E-DOC-CTC-20061027-0003v2.0
NAT Commands
572
outside_port The outside port number or range (only for maps of type napt).
>For a NAPT map: Represents the range of TCP/UDP ports to be
used as dynamic port range during the NAPT process.
>For a port-shifting map: Represents the source port(s) to be
translated (shifted) into inside_port.
Allowed values are:
>TCP/UDP port range [P-Q] (with Q > P)
>TCP/UDP port number (only for port-shifting maps).
OPTIONAL
for NAPT
map.
REQUIRED
for port-
shifting map.
inside_port The inside port number or range (only for maps of type napt).
If this parameter is specified for a map of type napt, then this map is
a port-shifting map.
Represents the target TCP/UDP ports to which the traffic has to be
shifted.
Allowed values are:
>TCP/UDP port range [P-Q] (with Q > P)
>TCP/UDP port number (only for port-shifting maps).
Note The size of inside_port must be identical to the size of
outside_port.
REQUIRED
for port-
shifting map
mode The mode to create the portmap.
Choose between:
>auto
>inbound
>outbound.
The standard is auto.
OPTIONAL