E-DOC-CTC-20061027-0003v2.0
Firewall Commands
357
firewall debug traceconfig
Configure the firewall trace options.
SYNTAX:
where:
EXAMPLE:
firewall debug traceconfig [tcpchecks = <{disabled | enabled}>]
[udpchecks = <{disabled|enabled}>]
[icmpchecks = <{disabled | enabled}>]
[sink = <{none | all | accept | deny | drop
| reset} or number>]
[forward = <{none | all | accept | deny | drop
reset} or number>]
[source = <{none | all | accept | deny | drop
| reset} or number>]
tcpchecks Disable or enable tcpchecks traces.
The default is disabled.
OPTIONAL
udpchecks Disable or enable udpchecks traces.
The default is disabled.
OPTIONAL
icmpchecks Disable or enable icmpchecks traces.
The default is disabled.
OPTIONAL
sink Specify the action traced by the firewall for sink traffic.
The default is none.
OPTIONAL
forward Specify the action traced by the firewall for forward traffic.
The default is none.
OPTIONAL
source Specify the action traced by the firewall for source traffic.
The default is none.
OPTIONAL
=>firewall debug traceconfig
Trace Config
============
tcpchecks : disabled
icmpchecks : disabled
sink : none
forward : none
source : none
=>