E-DOC-CTC-20061027-0003v2.0
ATM Commands
20
atm ifadd
Create a new ATM interface.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:

atm ifadd intf = <string>

intf The name for the new ATM interface.
Note If not specified, the destination parameter must be specified. In this
case the name of the destination will double as interface name.
REQUIRED
=>atm iflist
atm_0_35 : dest : atm_pvc_0_35
Retry : 10 QoS : default Encaps : vcmux Fcs : disabled Ulp : mac
Connection State : connected
=>
=>atm ifadd intf = RtPPPoA_atm
=>
=>atm iflist
atm_0_35 : dest : atm_pvc_0_35
Retry : 10 QoS : default Encaps : vcmux Fcs : disabled Ulp : mac
Connection State : connected
RtPPPoA_atm: dest : (none)
Retry : 10 QoS : default Encaps : llc Fcs : disabled Ulp : ip
Connection State : not-connected
=>
atm ifdelete Delete an ATM interface.
atm iflist Display the ATM interfaces.