E-DOC-CTC-20061027-0003v2.0
ADSL Commands
8
adsl config
Show/set the Asymmetric Digital Subscriber Line (ADSL) configuration.
SYNTAX:
where:
EXAMPLE:
The example below shows the default configuration for a Thomson ST ADSL/POTS variant:
adsl config [opermode = <{multimode | multi_adsl2 | multi_readsl2
| multi_adsl2plus}>]
[trace = <{disabled | enabled}>]
opermode The operational mode of the Thomson ST.
Choose between:
>multimode
>multi_adsl2
>multi_readsl2
>multi_adsl2plus
The default is multi_adsl2plus.
OPTIONAL
trace Enable or disable ADSL tracing.
The default is enabled.
OPTIONAL
=>adsl config
ADSL configuration:
opermode = multi_adsl2plus
trace = on
modemoption = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
=>