E-DOC-CTC-20061027-0003v2.0
IP Commands
468
ip debug sendto
Send UDP packets.
SYNTAX:
where:
ip debug sendto addr = <ip-address>
[count = <number{1-1000000}>]
[size = <number{0-20000}>]
[interval = <number{1-1000000}>]
[listen = <{disabled | enabled}>]
[dffield = <{disabled | enabled}>]
[srcaddr = <ip-address>]
[srcport = <number{1-65535}>]
dstport = <number{1-65535}>
[dstintf = <string>]
addr The destination IP address. REQUIRED
count A number between 1 and 1000000.
Represents the number of UDP packets to send.
The default is 1.
OPTIONAL
size A number between 0 and 20000 (bytes).
Represents the size of the ping packet(s).
The default is 1.
OPTIONAL
interval A number between 1 and 10000000 (milliseconds).
Represents the intermediate interval between two sent UDP packets.
The default is 100.
OPTIONAL
listen Listen for incoming ICMP packets (enabled) or only send ICMP packets
(disabled).
The default is disabled.
OPTIONAL
dffield Enable or disable setting of the don’t fragment flag in the IP headers of
the ping.
OPTIONAL
srcaddr The IP source address to use. OPTIONAL
srcport The UDP source port number to use. OPTIONAL
dstport The UDP destination port number to send to. REQUIRED
dstintf The IP interface name.
By specifying the destination interface with the dstintf parameter, a direct
send is performed instead of a routed send. This means that the statefull
firewall will be bypassed for the outbound packet. As a result, the
returning icmp packet can not be associated with an existing udp
connection (because there isn’t any) and is legally dropped by the
firewall. To prevent this packet from being dropped, disable the
ICMPchecks and UDPchecks in the firewall configuration.
OPTIONAL