E-DOC-CTC-20061027-0003v2.0
IP Commands
431
22 IP Commands
Introduction
This chapter describes the commands of the ip command group.
Contents
This chapter covers the following commands:
ip arpadd Add an entry to the ARP cache of a broadcast Internet Protocol
(IP) interface.
433
ip arpdelete Delete an entry from the ARP cache. 434
ip arplist Display the ARP cache. 435
ip config Show/set global IP stack configuration options. 436
ip flush Flush all the static IP parameters. 438
ip ifadd Create an IP interface. 439
ip ifattach Attach an IP interface. 440
ip ifconfig Configure the parameters of an IP interface. 441
ip ifdelete Delete an IP interface. 443
ip ifdetach Detach an IP interface. 444
ip iflist Display all the IP interfaces. 445
ip ifwait Wait for a status change of an IP interface. 446
ip ipadd Assign an IP address to an IP interface. 447
ip ipconfig Modify an IP address configuration. 448
ip ipdelete Remove an IP address from an IP interface. 449
ip iplist Display all the configured IP addresses. 450
ip mcast rtadd Add a multicast route to the multicast routing table. 451
ip mcast rtdelete Delete a multicast route from the multicast routing table. 452
ip mcast rtlist Display the multicast routing table. 453
ip mcast flush Flush the multicast routing table. 454
ip rtadd Add a route to the routing table. 455
ip rtdelete Delete a route from the routing table. 457
ip rtlist Display the routing table. 458
ip auto flush Flush the autoIP interfaces. 459
ip auto ifadd Create an autoIP interface. 460
ip auto ifattach Select and assign a link-local address to an autoIP interface. 461
ip auto ifconfig Configure an autoIP interface. 462
ip auto ifdelete Delete an existing autoIP interface. 464
ip auto ifdetach Release the link-local address for the given autoIP interface. 465
ip auto iflist Display the autoIP interfaces. 466
ip debug httpprobe Send a HTTP probe. 467