E-DOC-CTC-20061027-0003v2.0
ATM Commands
50
atm oam cc modify
Modify CC on the connection.
SYNTAX:
where:
RELATED COMMANDS:
atm oam modify port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
vpi = <number{0-15}>
[vci = <number{0-511}>]
[transmit = <{disabled | enabled}>]
[receive = <{disabled | enabled}>]
[auto = <{disabled | enabled}>]
[span = <{segment | end2end}>]
port The ATM port number.
Choose between:
>DSL0
>DSL1
>ATM2
>ATM3
>AAL5
>ATM5
Or specify a port number (dsl0 has port number 0).
REQUIRED
vpi A number between 0 and 15.
Represents the VPI.
REQUIRED
vci A number between 0 and 511.
Represents the VCI.
Note For a Virtual Path (VP) cross-connection, use 0 or do not specify.
OPTIONAL
transmit Enable or disable transmission of CC cells. OPTIONAL
receive Enable or disable loss of continuity. OPTIONAL
auto Enable or disable remote CC activation/deactivation. OPTIONAL
span Select the CC span.
Choose between:
>end2end: monitoring occurs on the entire VC between two ATM end
stations.
>segment: monitoring occurs on a VC segment between the Thomson
ST and a first-hop ATM switch.
OPTIONAL
atm oam cc list Display Continuity Check (CC) configuration.
atm oam cc send Send CC activate/deactivate to connection.