E-DOC-CTC-20061027-0003v2.0
ATM Commands

51

atm oam cc send
Send CC activate/deactivate to connection.
SYNTAX:
where:
RELATED COMMANDS:

atm oam cc send port = <{dsl0} or number>

vpi = <number{0-15}>
[vci = <number{0-511}>]

[span = <{segment | end2end}>]

[action = <{activate | deactivate}>]

[direction = <{source | sink | both}>]

port The ATM port number.
Choose between:
>DSL0.
Or specify a port number (dsl0 has port number 0).
REQUIRED
vpi A number between 0 and 15.
Represents the VPI.
REQUIRED
vci A number between 0 and 511.
Represents the VCI.
Note For a VP cross-connection, use 0 or do not specify.
OPTIONAL
span Select the CC span.
Choose between:
>end2end: monitoring occurs on the entire VC between two ATM end
stations.
>segment: monitoring occurs on a VC segment between the Thomson
ST and a first-hop ATM switch.
OPTIONAL
action Activate or deactivate CC.
The default is deactivate.
OPTIONAL
direction Indicates the direction of CC activity.
Choose between:
>source
>sink
>both.
The default is both.
OPTIONAL
atm oam cc list Display Continuity Check (CC) configuration.
atm oam cc modify Modify CC on the connection.