E-DOC-CTC-20061027-0003v2.0
Service Commands
647
service system modify
Modify a system service.
SYNTAX:
where:
RELATED COMMANDS:
service system modify name = <string>
[state = <{disabled | enabled}>]
[port = <supported port or number>]
[srcintf = <string>]
[log = <{disabled|enabled}>]
[qoslabel = <{None|DSCP|Interactive|
Management|Video|VoIP|default}>]
[routelabel = <{None|DSCP|Interactive|
Management|Video|VoIP|default}>]
[natpmweight = <number{0-255}>]
[forward = <{disabled|enabled}>]
name The name of the system service for this map. REQUIRED
state Disable or enable this system service. OPTIONAL
port The port for this map.
Select one of the supported TCP/UDP port names (see
“Supported TCP/UDP Port Names” on page 747) or,
alternatively, specify the port number.
OPTIONAL
srcintf The primary IP interface for this system service. OPTIONAL
log Disable or enable service logging OPTIONAL
qoslabel QoS label for service data OPTIONAL
routelabel Route label for service data OPTIONAL
natpmweight NAT portmap weight for this service OPTIONAL
forward Disable or enable service forwarding OPTIONAL
service system list Display the system services.