Technicolor - Thomson ST516, ST536, ST546 expr add

E-DOC-CTC-20061027-0003v2.0

Expr Commands

328

expr add

Add a subexpression to an expression.

SYNTAX:

where:

expr add name = <string>

type = <{intf | ip | serv}>

addr [!]= <ip-range>

[intf [!]= <string>]

[intfgroup [!]= <{wan|local|lan|tunnel|dmz|guest} or number>]

[tos [!]= <number{0-255}>]

[precedence [!]= <IP precedence type> or <number>]

[dscp [!]= <DSCP name> or <number>]

[proto = <supported IP protocol name> or <number>]

[srcport [!]= <supported TCP/UDP port name> or <number>]

[srcportend = <supported TCP/UDP port name> or <number>]

[dstport [!]= <supported TCP/UDP port name> or <number>]

[dstportend = <supported TCP/UDP port name> or <number>]

[icmptype [!]= <supported ICMP type name> or <number>]

[icmpcode [!]= <number{0-15}>]

[icmpcodeend = <number{0-15}>]

iIf a value is preceded by a “!”, it means NOT.

Forexample “intfgroup=!wan” means “if the interface group is different from WAN”.

name The name of an existing expression. REQUIRED

type The expression type.

Choose between:

>intf

>ip

>serv.

REQUIRED

addr The IP address (or range). Supports ip/mask notation.

Note Only for expression type ip.

REQUIRED

intf The IP interface name.

Note Only for expression type intf.

OPTIONAL

Contents

Main Page Page Page i 2 ADSL Commands.........................................................................7 3 ATM Commands........................................................................ 17 ii 4 AutoPVC Commands.................................................................69 5 Config Commands..................................................................... 73 iii 6 Connection Commands.............................................................81 7 CWMP Commands...................................................................101 8 Debug Commands................................................................... 105 9 DHCP Commands ....................................................................107 iv v 10 DNS Commands ......................................................................183 vi 11 DSD Commands.......................................................................209 12 DynDNS Commands................................................................227 13 Env Commands........................................................................ 243 vii 14 Eth Commands ........................................................................249 viii ix 15 Expr Commands ......................................................................327 16 Firewall Commands.................................................................343 17 GRP Commands....................................................................... 375 x 18 Hostmgr Commands ...............................................................387 19 IDS Commands........................................................................ 395 20 IGMP Commands..................................................................... 409 xi 21 Interface Commands............................................................... 427 22 IP Commands........................................................................... 431 xii 23 IPQoS Commands....................................................................473 24 Label Commands..................................................................... 487 25 Language Commands .............................................................513 xiii 26 MBUS Commands................................................................... 517 27 MEMM Commands.................................................................. 535 28 MLP Commands ......................................................................543 xiv 29 NAT Commands.......................................................................565 30 PPP Commands........................................................................583 xv 31 PPTP Commands .....................................................................611 32 Script Commands.................................................................... 619 33 Service Commands..................................................................627 xvi 34 SNMP Commands ...................................................................649 35 SNTP Commands.....................................................................665 36 Software Commands ..............................................................671 37 System Commands................................................................. 675 xvii 38 Systemlog Commands............................................................ 691 39 Upgrade Commands ...............................................................701 40 UPnP Commands..................................................................... 717 41 User Commands...................................................................... 721 xviii 44 Supported Key Names............................................................ 745 About this CLI Reference Guide About this CLI Reference Guide i ! Page 3 1 Root Commands Command Description i > > 4 ping > 5 traceroute > > Page 2 ADSL Commands adsl config Page 10 EXAMPLE (for a Thomson ST ADSL/POTS variant): Page Page Page Page Page adsl debug traceconfig 3 ATM Commands Page Page atm ifadd atm ifadd intf = <string> atm ifattach Attach a ATM interface. atm ifdetach Detach an ATM interface. atm ifattach intf = <string> intf The name of the ATM interface to be attached. REQUIRED atm ifconfig > > 23 > > > atm ifdelete atm ifdelete intf = <string> atm ifdetach Detach an ATM interface. atm ifattach Attach a ATM interface. atm ifdetach intf = <string> intf The name of the ATM interface to be detached. REQUIRED atm iflist atm iflist [intf = <string>] atm bundle add atm bundle attach 29 atm bundle config i > atm bundle clear atm bundle delete atm bundle detach Page atm bundle ifadd i atm bundle ifadd name = <string> intf = <string> [index = <number{0-6}>] atm bundle ifconfig atm bundle ifconfig name = <string> intf = <string> [low = <number{0-15}>] [high = <number{0-15}>] atm bundle ifdelete atm bundle list atm cac config atm cac list atm cac overbooking atm cac overbooking rt = <number{0-1000}> nrt = <number{0-1000}> atm debug aal5stats atm debug gstats atm debug portstats atm oam config atm oam config [clp = <number{0-1}>] [loopbackid = <string>] atm oam list Display the ATM OAM settings. atm oam list atm oam modify Page atm oam ping atm oam ping dest = <string> [count = <number{1-1000000}>] [interval = <number{100-1000000}>] atm oam cc list atm oam cc modify 51 atm oam cc send atm oam cc send port = <{dsl0} or number> > > > > 52 atm oam vclb add atm oam vclb add port = <{dsl0}or number> > 53 atm oam vclb del atm oam vclb del port = <{dsl0}or number> > atm oam vclb list 55 atm phonebook add atm phonebook add name = <string> addr = <atmchannel : PVC syntax is [port.]vpi.vci port=dsl0 | ...> > atm phonebook autolist i atm phonebook delete i Use=0 Use=1 atm phonebook delete name = <string> atm phonebook flush i 2. This command does not impact previously saved configurations. atm phonebook flush atm phonebook list atm qosbook add atm qosbook config atm qosbook ctdadd Page atm qosbook ctddelete atm qosbook ctddelete name = <string> atm qosbook ctdlist atm qosbook delete atm qosbook delete name = <string> Page atm qosbook list 4 AutoPVC Commands autopvc config Page autopvc list 5 Config Commands config delete config dump config flush i config flush [flush_ip = <{enabled | disabled}>] config list config load i Page config save 6 Connection Commands 82 connection appconfig > > > > Page connection appinfo connection applist List the available CONN/NAT application helpers. connection applist i connection bind connection bind application = <string> port = <port-range> connection bindlist List the current CONN/NAT application helper/port bindings. connection bindlist connection clean connection clean [level = <number{0-9}>] connection clear 90 connection config connection config [configchangemode = <{immediate | delayed}>] [probes = <{disabled | enabled}>] > > > connection debug connection debug [trace = <{disabled|enabled}>] connection describe connection describe [id = <number{0-2048}>] Page connection info connection list connection list [nr = <number{1-2048}>][string = <string>] Page connection stats Display the connection and stream statistics. connection stats connection timerclear connection timerclear [timer = <{tcpidle|tcpneg|tcpkill|udpidle|udpkill| icmpkill|ipidle|ipkill}>] connection timerconfig connection unbind connection unbind application = <string> port = <port-range> 7 CWMP Commands 102 cwmp config > > Page cwmp server config Page Debug Commands debug exec ! 9 DHCP Commands Page Page dhcp client ifadd dhcp client ifadd intf = <string> [defrqoptions = <{disabled|enabled}>] dhcp client ifattach dhcp client ifattach intf = <string> 112 dhcp client ifconfig RELATED COMMANDS i dhcp client ifdelete dhcp client ifdelete intf = <string> dhcp client ifdetach 115 dhcp client iflist The Thomson ST is configured as DHCP client disabled its Ethernet interface eth0. List all the DHCP leases attached to dynamic interfaces. EXAMPLE INPUT/OUTPUT IN A NETWORKED ENVIRONMENT: dhcp client iflist [intf = <string>] [expand = <{disabled|enabled}>] Page 117 dhcp client ifrenew EXAMPLE 1: Renew the DHCP lease. dhcp client ifrenew intf = <string> intf The name of the dynamic interface for which the DHCP lease must be renewed. 118 EXAMPLE 2: dhcp client ifattach Activate a DHCP client. The Thomson ST is configured as DHCP client disabled its Ethernet interface eth0. dhcp client debug clear Clear the DHCP client statistics. dhcp client debug stats Print the DHCP client statistics. dhcp client debug clear dhcp client debug stats Print the DHCP client statistics. dhcp client debug clear Clear the DHCP client statistics. dhcp client debug stats dhcp client debug traceconfig dhcp client rqoptions add dhcp client rqoptions delete dhcp client rqoptions list dhcp client rqoptions optionlist dhcp client txoptions add dhcp client txoptions delete dhcp client txoptions list dhcp client txoptions optionlist dhcp relay add dhcp relay debug stats dhcp relay debug traceconfig dhcp relay config dhcp relay config [agentinfo = <{disabled | enabled}>] [agentmismatch = <{disabled | enabled}>] dhcp relay delete dhcp relay flush dhcp relay ifconfig Page dhcp relay iflist dhcp relay iflist [intf = <string>] dhcp relay list dhcp relay modify dhcp relay ruleadd dhcp relay ruledelete 143 dhcp rule add > > > dhcp rule debug traceconfig dhcp rule delete dhcp rule flush dhcp rule list Page Page dhcp server policy dhcp server debug clear Clear the DHCP server statistics. dhcp server debug stats Show the DHCP server statistics. dhcp server debug clear dhcp server debug stats Page dhcp server debug traceconfig dhcp server lease add Page dhcp server lease delete dhcp server lease delete [clientid = <clientid | none>] dhcp server lease flush dhcp server lease flush [pool = <string>] dhcp server lease list dhcp server lease list [clientid = <clientid | none>] Page dhcp server option instadd Page dhcp server option instdelete dhcp server option instdelete name = <string> dhcp server option instlist dhcp server option tmpladd dhcp server option tmpldelete dhcp server option tmpllist dhcp server pool add dhcp server pool add name = <string> Page dhcp server pool config Page dhcp server pool delete dhcp server pool delete name = <string> dhcp server pool flush dhcp server pool list dhcp server pool optadd dhcp server pool optadd name = <string> instname = <string> dhcp server pool optdelete dhcp server pool optdelete name = <string> instname = <string> dhcp server pool optadd Add an option instance to the DHCP server pool. dhcp server pool rtadd dhcp server pool rtdelete dhcp server pool ruleadd dhcp server pool ruleadd name = <string> [key = {or | and}] rulename = <string> dhcp server pool ruledelete Page 10 DNS Commands dns client config dns client dnsadd dns client dnsdelete dns client dnsdelete index = <number{1-99}> dns client dnslist Page Page dns server config dns server config [domain = <string>] [timeout = <number{0-2147483647}>] [suppress = <number>] [WANDownSpoofing = <{disabled | enabled}>] [WDSpoofedIP = <ip-address>] Page dns server debug clear Clear the DNS server/forwarder statistics. dns server debug stats Print the DNS server/forwarder statistics. dns server debug clear dns server debug stats dns server debug spoof clear dns server debug spoof getaddress dns server debug spoof getflags dns server debug spoof list dns server debug spoof update dns server host add dns server host add name = <string> [addr = <ip-address>] [ttl = <number{0-2147483647}>] dns server host delete dns server host flush dns server host list dns server route add Page dns server route delete dns server route flush dns server route list Page 11 DSD Commands dsd config i Page dsd debug connection list dsd debug proxy dsd debug recycling dsd debug stats dsd intercept config dsd syslog config dsd syslog list 219 dsd urlfilter config > > dsd urlfilter rule add dsd urlfilter rule delete dsd urlfilter rule delete index = <number> [url = <string>] dsd urlfilter rule flush Remove all current rules. dsd urlfilter rule flush dsd urlfilter rule list dsd urlfilter rule modify Page Page 12 DynDNS Commands dyndns add dyndns delete Page dyndns list 232 dyndns modify > > > > > > Page dyndns host add dyndns host add group = <string> name = <string> dyndns host delete dyndns host delete name = <string> Page dyndns host list dyndns service list List all dynamic DNS services. dyndns service list Page 240 dyndns service modify > > > > > > dyndns service list List all dynamic DNS services. Page 13 Env Commands Page env get Page env set env unset env unset var = <string> 14 Eth Commands Page Page eth ifadd eth ifattach eth ifconfig eth ifdelete eth ifdetach eth iflist Page Page eth bridge list Page Page Page 264 eth bridge config > eth bridge dynvlan actlist eth bridge dynvlan add eth bridge dynvlan config eth bridge dynvlan delete Page eth bridge dynvlan list Page eth bridge ifadd eth bridge ifattach 274 eth bridge ifconfig > > 275 > > eth bridge ifdelete eth bridge ifdetach eth bridge iflist Page eth bridge igmpsnooping config Page eth bridge igmpsnooping ifconfig eth bridge igmpsnooping iflist eth bridge igmpsnooping clear eth bridge macadd Page eth bridge macdelete Remove a MAC address from the filtering database. eth bridge macdelete [brname = <{bridge}>] hwaddr = <hardware-address> [vlan = <string>] Page eth bridge maclist Display the MAC address database. eth bridge maclist [brname = <{bridge}>] brname The name of a bridge instance. OPTIONAL eth bridge mcdadd eth bridge mcddelete eth bridge mcdlist 293 eth bridge rule add > > eth bridge rule delete eth bridge rule delete index = <number{0-32}> Page eth bridge rule list eth bridge vlan ifadd eth bridge vlan ifconfig eth bridge vlan ifdelete eth bridge vlan iflist eth device ifconfig eth device iflist Show status of Ethernet interfaces. eth device iflist eth switch group flush eth switch group list eth switch group move eth switch group move group = <number{0-3}> port = <number{1-4}> eth switch mirror capture i eth switch mirror egress i eth switch mirror egress port = <number{1-4}> [state = <{enabled | disabled}>] eth switch mirror ingress i eth switch mirror ingress port = <number{1-4}> [state = <{enabled | disabled}>] eth switch share add eth switch share delete eth switch share list Page eth switch qos config eth switch qos ifconfig eth switch qos list eth switch qos weights eth switch shaper config eth switch shaper ifconfig eth switch shaper iflist eth switch storm ifconfig Page eth vlan add eth vlan add name = <string> vid = <number{2-4094}> [addrule = <{disabled | enabled}>] eth vlan delete eth vlan flush Flush all VLANs. i eth vlan flush eth vlan list 15 Expr Commands 328 expr add > 329 > > > > > > Page expr delete Delete an expression. expr list List the expressions. expr delete expr add Add a subexpression to an expression. expr list List the expressions. Page expr list 336 EXAMPLE 1: 337 EXAMPLE 2: Page 339 expr modify > SYN TAX: > 340 > > > > > > Page Page 16 Firewall Commands 344 firewall config > > > Page Page firewall list 348 EXAMPLE of output in text mode: EXAMPLE of output in CLI mode: Page firewall chain delete Delete a chain. firewall chain list List all chains. Page firewall chain add Add a chain. firewall chain list List all chains. Page 354 firewall chain list firewall chain list [format = <{pretty | cli}>] > firewall debug clear Clear the firewall statistics. firewall debug stats Display the firewall statistics. firewall debug clear firewall debug stats Display the firewall statistics. firewall debug clear Clear the firewall statistics. firewall debug stats firewall debug traceconfig 358 firewall level add firewall level add name = <string> [readonly = <{disabled | enabled}>] [service = <{disabled | enabled}>] [proxy = <{disabled|enabled}>] [text = <quoted string>] > firewall level delete Page firewall level list 362 firewall level modify firewall level modify name = <string> [readonly = <{disabled | enabled}>] [service = <{disabled | enabled}>] [proxy = <{disabled|enabled}>] [text = <quoted string>] > firewall level set firewall rule add firewall rule delete firewall rule flush firewall rule list Page firewall rule modify firewall rule debug clear firewall rule debug stats Show the firewall rule statistics. firewall rule debug stats firewall rule debug stats [chain = <chain name>] firewall rule debug clear Clear the firewall rule statistics. firewall rule debug traceconfig 17 GRP Commands grp config grp config [cdistance = <number{0-255}>] [kdistance = <number{0-255}>] [rdistance = <number{0-255}>] Page grp rtlist grp rtlist [dst = <ip-address>] [dstmask = <ip-mask (dotted or cidr)>] 379 grp rip config > > > Page grp rip show Show the RIP settings and the routes in the RIP database. Page 383 grp rip ifconfig > > > > Page grp rip show Show the RIP settings and the routes in the RIP database. grp rip show Page 18 Hostmgr Commands hostmgr add Page hostmgr clear hostmgr config hostmgr delete hostmgr delete mac_addr = <hardware-address> Page hostmgr list 19 IDS Commands Page ids config ids config [state = <{disabled | enabled}>] [trace = <{disabled|enabled}>] ids parser list ids parser modify Page ids pattern clear Resetthe pattern tracker. ids pattern clear ids pattern list ids pattern stats ids signature list ids signature modify ids threshold clear Reset the IDS thresholds to their default values. ids threshold clear ids threshold list Displaythe IDS thresholds. ids threshold modify Modify the IDS thresholds. ids threshold list ids threshold modify 20 IGMP Commands igmp host config Page igmp host list igmp host ifconfig igmp host iflist igmp host iflist [expand = <{disabled | enabled}>] igmp host debug clear igmp host debug stats Print IGMP statistics. igmp host debug clear Clear IGMP statistics. igmp host debug stats igmp proxy config Page Page igmp proxy grouplist igmp proxy ifconfig igmp proxy iflist igmp proxy iflist [expand = <{disabled | enabled}>] Page igmp proxy debug clear igmp proxy debug stats igmp proxy debug stats igmp proxy debug traceconfig Page Interface Commands interface list interface list [expand = <{disabled | enabled}>] [reverse = <{disabled | enabled}>] Interface Commands Page 22 IP Commands Page ip arpadd ip arpadd intf = <string> ip arpdelete ip arpdelete intf = <string> ip arplist ip config 437 > Page ip ifadd ip ifadd intf = <string> dest = <string> ip ifattach Attach an IP interface. ip ifdetach Detach an IP interface. ip ifattach intf = <string> intf The name of the IP interface to be attached. REQUIRED ip ifconfig ip ifconfig intf = <string> [mtu = <number{68-65535}>] [status = <{down | up}>] > > i interface. ip ifdelete ip ifdelete intf = <string> ip ifdetach Detach an IP interface. ip ifattach Attach an IP interface. ip ifdetach intf = <string> intf The name of the IP interface to be detached. REQUIRED ip iflist ip iflist [expand = <{disabled | enabled}>] [string = <string>] [beginstring = <string>] ip ifwait ip ipadd ip ipconfig i ip ipdelete ip ipdelete addr = <ip-address> ip iplist ip mcast rtadd ip mcast rtdelete ip mcast rtlist ip mcast flush ip rtadd ip rtdelete Delete a route from the routing table. ip rtlist Display the routing table. ip rtdelete ip rtlist ip rtlist [expand = <{disabled | enabled}>] Page ip auto ifadd ip auto ifadd intf = <string> [addr = <ip-address>] ip auto ifattach ip auto ifattach intf = <string> ip auto ifconfig Page ip auto ifdelete ip auto ifdetach ip auto ifdetach intf = <string> ip auto iflist 467 ip debug httpprobe DESCRIPTION: > > > ip debug httpprobe url = <string> [version = <{1.0 | 1.1}>] ip debug sendto Page ip debug stats Display IP statistics. ip debug stats 471 ip debug traceconfig > > Page 23 IPQoS Commands 474 ipqos config i > 475 > Page ipqos list ipqos ef config ipqos ef config intf = <string> [timeout = <number{100-10000}>] [mtu = <number{68-65535}>] ipqos ef list ipqos ef stats ipqos queue clear Clear the IPQoS statistics. ipqos queue stats Show the IPQoS subqueue statistics. ipqos queue clear 482 ipqos queue config > > > > > > Page ipqos queue list Display the IPQoS subqueue configuration. ipqos queue config Modify the IPQoS subqueue configuration. ipqos queue list [dest = <string}>] ipqos queue stats ipqos queue stats [dest = <string}>] Page 24 Label Commands label add Create a new label. label add name = <string> name The name of the label to be added. REQUIRED label delete Delete a label. label list Display the labels. label delete label delete name = <string> Page label list label list [name = <string>] 492 label modify > > > > 493 > > > Page label chain add Add a new label chain. label chain add chain = <string> chain The name of the chain to be added. REQUIRED label chain delete Delete a label chain. label chain list Display a list of chains. label chain delete Delete a label chain. label chain delete chain = <string> chain The name of the chain to be deleted. REQUIRED label chain add Add a new label chain. label chain list Display a list of chains. Page 498 label chain list label chain list [format = <{pretty | cli}>] > 499 label rule add > > > label rule delete Delete a label rule. Page label rule delete Delete a label rule. label rule delete chain = <string> index = <number> Page label rule flush label rule flush [chain = <string>] 505 label rule list label rule list [chain = <string>] [format = <{pretty | cli}>] > label rule add Add a label rule. label rule delete Delete a label rule. 507 label rule modify i > > > label rule debug clear label rule debug stats Display the label rule statistics. label rule debug stats label rule debug stat s [chain = <string>] label rule debug traceconfig Page 25 Language Commands language config language delete language list i 26 MBUS Commands mbus client config mbus client exec Page mbus client register mbus debug stats mbus debug clearstats mbus debug traceconfig mbus listobjects mbus listtypes mbus listtypes [path = <quoted string>] [expand = <{disabled | enabled}>] mbus listenums mbus listcontexts mbus listsubscriptions mbus debug loadobjects mbus debug unloadobjects mbus pluginevent Page Page 27 MEMM Commands memm debug lock traceconfig memm debug lock traceconfig [level = <number{0-4}>] memm debug traceconfig Page Page Page memm stats Display memm statistics. memm stats [name = <quoted string>] name Select typename(s) to list (supports partial typename). OPTIONAL Page 28 MLP Commands Page mlp import Page mlp debug stats mlp debug traceconfig mlp privilege add mlp privilege delete Delete a privilege. mlp privilege list Display the privileges. mlp privilege addzone i mlp privilege addzone name = <string> zone = <string> mlp privilege config mlp privilege config name = <string> [score = <{hex-word}[:{hex-word}] ex: 'a12:c30f'>] mlp privilege delete Delete a privilege. mlp privilege delete name = <string> name The name of the privilege to be deleted. REQUIRED Page mlp privilege list mlp privilege delete Add a privilege. mlp privilege delete Delete a privilege. mlp privilege removezone i mlp privilege removezone name = <string> zone = <string> mlp role add mlp role add name = <quoted string> parent = <string> Page mlp role addpriv mlp role config mlp role config name = <string> [parent = <string>] mlp role delete Delete a role. mlp role delete name = <string> name The name of the role to be deleted. REQUIRED mlp role delete Add a role. mlp role list Display the roles. mlp role list mlp role list [name = <string>] [verbose = <{minimal | medium | all}>] > > > mlp role removepriv 29 NAT Commands nat config Page nat ifconfig nat iflist 570 nat mapadd > > > > Page Page Page nat mapdelete nat mapdelete intf = <string> index = <number> nat maplist nat maplist [intf = <string>] [expand = <{disabled | enabled}>] [string = <string>] nat tmpladd Page 578 > > > > > > Page nat tmpldelete nat tmpldelete index = <number> nat tmpllist nat tmplinst nat tmplinst intf = <string> addr_index = <ip-address> dynamic_addr = <ip-address> 30 PPP Commands Page ppp ifadd Create a new PPP interface. ppp ifadd intf = <string> Page Page ppp ifdetach Detach a PPP interface. ppp ifconfig 590 > Page 592 > laddr > Page ppp ifdelete Delete a PPP interface. ppp ifdelete intf = <intfname> intf The name of the PPP interface to be deleted. REQUIRED Page Page ppp ifattach Attach a PPP interface. 598 ppp iflist EXAMPLE INPUT/OUTPUT : ppp iflist [intf = <intfname>] [string = <string>] ppp ifscan i ppp ifscan intf = <string> [time = <number{0-36000}>] 600 ppp rtadd > i > ppp rtdelete Delete the route for a PPP link. ppp rtdelete i ppp rtadd Add a route to the routing table when the PPP link comes up. Page ppp relay ifadd ppp relay ifconfig ppp relay ifdelete ppp relay iflist Page Page 31 PPTP Commands 612 pptp ifadd i > > > Page pptp list 615 pptp profadd > > > Page pptp profdelete pptp proflist 32 Script Commands ! script add script delete Page 623 script list Some of the default scripts are shown below: Display a script or all scripts. EXAMPLE script list [name = <string>] Page script run script run name = <string> pars = <string> Page 33 Service Commands service host assign service host assign name = <quoted string> [host = <ip-address>] [log = <{disabled|enabled}>] service host config 630 service host add service host add name = <quoted string> [mode = <{server | client | custom}>] > > > service host delete Delete a host service. service host delete name = <quoted string> name The name of the host service to be deleted. REQUIRED service host add Add a host service. service host list Display a list of host services. service host disable service host disable [name = <quoted string>] Page service host list service host list [name = <quoted string>] service host stats service host triggerlist service host rule add service host rule delete service system ifadd Add an interface group to the access list. service system ifdelete Delete an interface group from the access list. service system ifadd name = <string> group = <{wan|local|lan|tunnel|dmz|guest} or number> group The interface group for this access list. REQUIRED service system ifdelete Delete an interface group from the access list. service system ifadd Add an interface group to the access list. service system ifdelete name = <string> group = <{wan|local|lan|tunnel|dmz|guest} or number> group The interface group for this access list. REQUIRED service system ipadd Add an IP address (range) to the access list. service system ipdelete Delete an IP address (range) from the access list. service system ipadd name = <string> ip The IP address (range) for this access list. REQUIRED service system ipdelete Delete an IP address (range) from the access list. service system ipadd Add an IP address (range) to the access list. service system ipdelete name = <string> ip The IP address (range) for this access list. REQUIRED service system list service system modify Modify a system service. service system mapadd service system mapdelete service system modify Page 34 SNMP Commands snmp config snmp get snmp getnext snmp walk snmp walk [ObjectId = <string>] 654 snmp community add snmp community add securityname = <{RWCommunity | ROCommunity}> communityname = <password> > > snmp community delete snmp community list snmp community modify snmp ifadd snmp ifdelete snmp ifattach snmp ifdetach snmp ifconfig Page Page 35 SNTP Commands sntp add sntp add [addr = <ip-address>] [version = <number{1-4}>] sntp config sntp config [state = <{enabled | disabled}>] [poll = <number{1-60}>] [pollpresync = <number{1-60}>] sntp delete sntp delete [addr = <ip-address>] Page sntp list Software Commands 36 Software Commands Page Page Page 37 System Commands 676 system config ! > > > > > Page system flush system locale Page system reboot ! 682 system reset ! system reset factory yes/no = <{yes | no}> proceed no/yes = <{no | yes}> > > Page system timedreboot timedreboot [state = <{disabled|enabled}>] [time = <number{0-16384}>] [date = <string>] system debug autosave system debug stats system ra config system ra config [secure = <{disabled | enabled}>] [port = <number>] [timeout = <number>] Page system rtc settime i Page 38 Systemlog Commands Page systemlog show Page systemlog send i systemlog DBG dbg_syslog Page Page Page Page 39 Upgrade Commands upgrade config upgrade start Page upgrade debug sesslist Display the list of sessions. upgrade debug sesslist upgrade profile add upgrade profile modify upgrade profile delete upgrade profile list upgrade ifadd upgrade ifattach upgrade ifconfig upgrade ifdelete upgrade ifdetach Page Page 40 UPnP Commands 718 upnp config > > > Page upnp list i upnp list [verbose = <number{0-2}>] 41 User Commands user add i user add name = <quoted string> password = <password> role = <string> [hash2 = <string>] 723 DESCRIPTION: > > user delete Delete a user. user list Display the users. user config i user config name = <string> [password = <password>] [role = <string>] Page user delete i user delete name = <string> user flush ! Flush the users. The user will not have to authenticate himself to gain access to the Thomson ST. user flush user list user add Add a user. user delete Delete a user. user rights Display the session rights. i user rights 42 Abbreviations Page Page Page 43 System Logging Messages Auto-PVC Module Configuration Module DHCP Client Module DHCP Relay Module DHCP Server Module Dyndns Module Firewall Module LOGIN Module Kernel Module Linestate Module NAPT Module PPP Module PPTP Module RIP Module Routing Module Session Module SNTP Module Page Page 44 Supported Key Names Supported IP Protocols Protocol name Number Description Supported TCP/UDP Port Names Page Page Supported ICMP Type Names ICMP Type name Number Description Supported Facilities Facilty Name Hierarchy Code Syslog facility (listed according descending importance) Supported Severities IP Precedence Differentiated Services Code Point (DSCP) PHB PHB Name Binary value Page A B C D Page E F G H I Page K L M N O P R S T U V W