E-DOC-CTC-20061027-0003v2.0
GRP Commands

383

grp rip ifconfig
Configure a RIP interface.
SYNTAX:
where:

grp rip ifconfig intf = <string>

[rip = <{disabled | enabled}>]

[rxversion = <{rip_unspec | rip_v1 | rip_v2 | rip_v1-2}>]

[authmode = <{none | cleartext}>]

[authstring = <quoted string>]

[splithorizon = <{disable | enable}>]

intf The name of the RIP interface to be configured.
Tip Use the command :grp iflist to obtain a list of avail-
able interfaces.
REQUIRED
rip Enab led or disabled RIP on this interface.
The default is disabled.
OPTIONAL
rxversion Configure the RIP receive version to be applied.
Choose between:
>rip_unspec : No RIP version is specified as such. The actual RIP
version to be used is negotiated with the remote side.
>rip_v1: RIP version 1 is used.
>rip_v2: RIP version 2 is used.
>rip_v1-2: RIP version 1 and RIP version 2 are used.
The default is rip_uns pec.
OPTIONAL
authmode Configure the RIP authentication mode.
Enter the mode in cleartext or specify none in case no authentication
mode is required.
The default is none.
OPTIONAL
authstring Configure the authentication string for the RIP authentication
password.
Note Leave authstring unspecified in case authmode is none.
OPTIONAL
splithorizon Enable or disable the split horizon status for this interface.
The default is enabled.
OPTIONAL