To keep whole or part of the phone number secret
Press (SECRET) (direct call station 3) before and after the number you wish to keep secret.
¡The phone number will not appear on the display
and on the telephone number list.
¡Pressing (SECRET) once counts as two digits.
Press (STOP).
Enter the station name, up to 10 characters, by following the instructions on page 15.
5
6 Press (START/SET) to store the station name. ¡To program other stations, repeat steps 2 to 6.
7
NAME=
4
Press (START/SET) to store the number.
3 Enter the phone number up to 30 digits in length.
¡To enter a hyphen in a phone number, press (HYPHEN) (direct call station 8).
For speed dialing:
Press K, then press the desired 2-digit number (00–99).
2b
To store the phone numbers in memory, proceed as follows:
Storing phone numbers for automatic dialing

The unit’s memory allows you to use both one-touch dialing and speed dialing for rapid access to your most frequently dialed numbers.

One-touch dialing: The unit is equipped with 13 direct call station keys, each of which is divided into an upper station and a lower station.

Speed dialing: The unit is equipped with 100 additional dialing stations. These stations are assigned to 2-digit numbers (00–99).

1

Press (MENU) until the following message is

 

displayed.

(SECRET)

 

 

 

STORE TEL NO.

(DELETE)

2a

For one-touch dialing:

(MENU)

» For upper stations 1–13

Basic

 

Press one of the direct call station keys.

 

» For lower stations 14–26

Operations

 

Press (LOWER), then press one of the

 

direct call station keys.

 

 

 

 

 

 

 

 

(LOWER)

 

 

 

 

 

 

Speed

 

dial

(STOP)

 

 

 

(START/SET)

(HYPHEN)

stations

 

 

 

call

 

 

 

 

 

Direct

 

 

 

 

 

stations

Helpful hint:

¡To confirm stored phone numbers and station names, print a telephone number list (see page 62).

To erase a stored number and station name

Press (STOP) in step 3 to clear the phone number. Press (DELETE) (direct call station 7) repeatedly in

step 5 until all of the characters are erased. Then press (START/SET).

Operations

Advanced

 

 

31