Error messages on the display

If the unit detects a problem, the following messages will appear on the display.

 

ERROR MESSAGE

 

CAUSE & REMEDY

 

 

 

 

 

 

 

 

 

¡There is something wrong with the unit. Contact our service personnel (p. 79).

 

CALL SERVICE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¡The recording paper is jammed near the paper cassette. Clear the jammed

 

CHECK CASSETTE

 

 

 

 

 

paper (p. 72).

 

 

 

 

 

 

 

 

 

 

 

 

 

¡The top cover is open. Close it.

 

CHECK COVER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¡The document is not fed into the unit properly. Reinsert the document and try

 

CHECK DOCUMENT

 

 

 

 

 

again. If misfeeding occurs frequently, clean the feeder rollers (p. 74). If the

 

 

 

 

 

 

 

 

problem remains, adjust the feeder pressure (p. 73).

 

 

 

 

 

 

 

 

 

¡The film is not inserted in the cartridge correctly.

 

CHECK FILM

 

 

 

 

 

Reinsert it correctly by referring to step 8 on page 76.

 

 

 

 

 

 

 

 

 

 

 

 

 

¡Memory (phone numbers, parameters, etc.) has been erased.

 

CHECK MEMORY

 

 

 

 

 

Re-program.

 

 

 

 

 

 

 

 

 

 

 

 

 

¡The unit has (a) document(s) in memory. See the other message’s instructions

 

FAX IN MEMORY

 

 

 

 

 

to print out the document(s). See page 44.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¡The memory is full of received documents due to a lack of recording paper, a

 

FAX MEMORY FULL

 

 

 

 

 

recording paper jam, etc. Install paper or clear the jammed paper.

 

 

 

 

 

 

 

 

 

 

 

 

 

¡Film is empty. Replace the film or film cartridge with a new one (p. 75).

 

FILM EMPTY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¡The blue leader of the film was not wound completely or the unit is out of film.

 

LOADING FILM

 

 

 

 

 

Wait for a while.

 

 

 

 

 

 

 

 

 

 

 

 

 

¡There is no room left in memory to record a message. Erase some or all of the

 

MESSAGE FULL

 

 

 

 

 

messages (p. 28, 53).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¡A common greeting message has not been recorded.

 

NO ANS GREETING

 

 

 

 

 

Record the message (p. 17).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¡The receiving unit is busy or ran out of recording paper. Try again.

 

NO RESPONSE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¡The unit is out of recording paper. Install paper (p. 9).

 

OUT OF PAPER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¡The recording paper is jammed near the head unit. Clear the jammed paper

 

PAPER JAMMED

 

 

 

 

 

(p. 71).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¡The fax function cannot be operated on the PC. The RS232C cable is not

 

PC FAIL OR BUSY

 

 

 

 

 

connected correctly, or the software is not running on the PC.

 

 

 

 

 

 

 

 

 

 

 

 

 

¡The other fax machine does not have a polling function. Check with the other

 

POLLING ERROR

 

 

 

 

 

party.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¡The receiving unit is busy or ran out of recording paper. Try again.

 

REDIAL TIME OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¡The document is jammed. Remove the jammed document (p. 73).

 

REMOVE DOCUMENT

 

 

 

 

 

¡Attempted to transmit a document longer than 600 mm (2358w). Press the STOP

 

 

 

 

 

 

 

 

 

 

 

 

button and remove the document (p. 73). Divide the document into two or more

 

 

 

 

sheets and try again.

 

 

 

 

 

 

 

 

 

¡A transmission error occurred. Try again.

 

TRANSMIT ERROR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¡The unit is too hot. Let the unit cool down.

 

UNIT OVERHEATED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operations

Advanced

 

 

Troubleshooting Care Routine and

65