Featuresand Accessories
6P7240 4 GHz 5XAct ive Probe UserManual
Table1: P7240 features and standard accessories (Cont.)
Feature/Accessory Description
Installingthe push-in probe tip. Attach the
push-inprobe tip by aligning the tip into the probe
tip socketand pushing the tip in until it is seated.
Either end of the tipmay be used.
Do not force the tip.Also,be careful not to poke
yourselfwith the sharp probe tip. To remove the
tip, gentlygrab the tip with small pliers, and pull
the tip out.
SureToeprobe tip (4 ea).The SureToe tip is a
pointed probe tipuseful for probing in dense
circuitry.Attach the SureToe adapters the same
way as the push-inprobe tips.
Do not force the tip.Also,be careful not to poke
yourselfwith the sharp probe tip. They can be
used with anyof the socketed accessory leads.
Tektronixpart number: ST501 (package of 12)
KlipChip
Y-leadadapter
SMT KlipChip (2 ea).Use the SMT KlipChip
test clipsto access fragile, dense circuitry.
KlipChiptest clips can be connected to the Y-lead
or three-inchground leads. Simply press the lead
socketinto the KlipChip handle.
The KlipChipbody freely turns, allowing better
probe orientation.To reduce stress and provide a
lower profileon components being tested, the
flexiblesleeve of the KlipChip bends up to a
35 degree angle.
Tektronixpart number: 206-0364-XX