APPENDIX A-5: DAS Triggers and Parameters Teledyne API - T300/T300M and M300E/EM PN 04906H (DCN5840)

A-32

Table A-6: T300/T300M and M300E/EM DAS Parameters, Revision L.8

Name Description Units
DETMES Detector measure reading mV
DETREF Detector reference reading mV
RATIO M/R ratio. none
SLOPE1 Slope for range #1 none
SLOPE2 Slope for range #2 none
OFSET1 Offset for range #1 none
OFSET2 Offset for range #2 none
CO2SLP 5 CO2 slope none
CO2OFS 5 CO2 offset %
O2SLPE 8 O
2 slope none
O2OFST 8 O
2 offset %
AZERO 1,2 Auto-zero reading M/R
ZSCNC1 Concentration for range #1 during zero/span calibration, just before
computing new slope and offset
PPM
ZSCNC2 Concentration for range #2 during zero/span calibration, just before
computing new slope and offset
PPM
CO2ZSC 5 CO2 concentration during zero/span calibration, just before
computing new slope and offset
%
O2ZSCN 8 O2 concentration during zero/span calibration, just before computing
new slope and offset
%
CONC1 Concentration for range #1 PPM
CONC2 Concentration for range #2 PPM
CO2CNC 5 CO2 concentration %
O2CONC 8 O
2 concentration %
STABIL Concentration stability PPM
BNTEMP Bench temperature C
BNCDTY Bench temperature control duty cycle Fraction
(0.0 = off,
1.0 = on full)
WTEMP Wheel temperature C
WHLDTY Wheel temperature control duty cycle Fraction
(0.0 = off,
1.0 = on full)
O2TEMP 8 O
2 sensor cell temperature C
SMPTMP Sample temperature C
SMPFLW 6 Sample flow cc/m
SMPPRS Sample pressure "Hg
VACUUM 1, 3, 6 Vacuum pressure "Hg
PRGPRS 4 Purge pr essure PSIG
BOXTMP Internal box temperature C
BX2TMP 2,
OVNTMP 9
Internal box temperature #2/oven C
06864B DCN6314