Teledyne t320, t320u 5.9.2. ANALOG OUTPUT

Teledyne API – Model T300/T300M CO Analyzer Setup Menu
119
5.9.2. ANALOG OUTPUT
Analog Output is used as a step test to check the accuracy and proper operation of the
analog outputs. The test forces all four analog output channels to produce signals
ranging from 0% to 100% of the full scale range in 20% increments. This test is useful
to verify the operation of the data logging/recording devices attached to the analyzer.
(See also Section 12.5.8.2).
Access the Analog Output Step Test from the DIAG Menu as follows:
06864B DCN6314