| Part No. |
June 2001 | |
Page 7 of 34 |
Telephone Company Compliance—U.S.A. Models
The Telenetics 326X Series Modem complies with Part 68 of the FCC rules. The modem card includes a label with the FCC registration number for this equipment. If requested by the telephone company, you must provide this information. Generally, the ringer equivalence number (REN) is also requested for telephone equipment. The REN is listed on the FCC registration label.
The REN is used to determine the number of devices that can be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. The sum of the RENs should not exceed five. To be certain of the number of devices that can be connected to the line, contact the telephone company to determine the maximum REN for the calling area.
NOTE: The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect equipment operation. If this happens, the telephone company will notify you in advance so that you can make the necessary modifications to maintain uninterrupted service.
This equipment uses the following USOC jacks: RJ11C, RJ16C, RJ45S, RJ4MB, and for the leased line, JM8.
Refer to the 326X Series Modem User’s Guide, Appendix C,
Information, for regulatory agency information for your country.
Backplane Jumpers for the Busy Out Feature
This section applies to countries that use the “Universal International” (UI) Modular Nest enclosure backplane.
This section also is of interest to users in Hong Kong and the United Kingdom.
Hong Kong and the United Kingdom
IMPORTANT: In Hong Kong and the United Kingdom, do not install a 3268 or 3268FAST Modem (leased line with dial restoral) in a Busy Out backplane.
The modem will not function.
In Hong Kong and the United Kingdom, Busy Out backplanes are
Busy Out operation. These backplanes do not use pin jumpers.
