Using the USB Connection Option
The preferred method for establishing a data connection with the SX7 is through the Ethernet
Port (see “Connect the SX7 toYour Computer” on page 5). However,you may also use the
supplied USB cable instead of the Ethernet connection.
The USB connection uses Dial-Up Networking (DUN) to achieve WirelessWAN connectivity to
the network. Before setting up a USB connection, you mustinstall the SX7 USB Modem dr ivers
from the CD that was packaged with your SX7.

Install the USB Drivers

1. Insert the CD into your computer’s CD drive.
2. Click Install USB Modem (or explore the CD contents and double-click
SX7 Driver Installer.exe).(The installer will launch.)
3. Click Next. (The drivers will be installed.)
4. Click Finish.
USB Connection Option
Wi PATHTM SX7 12 User Guide