Telular SX7T, SX7M manual Status LEDs, LED Reference Table

Status Indicators

Status LEDs

In addition to checking your status through the Telular Device Manager on your computer, you can also use the LED indicators on the unit for a quick check of valuable connection and coverage information.

WiPATH SX7T LED Indicators

			Signal	Signal	Signal
Power
			Strength Strength Strength
	Messaging
			1	2	3
	Phone/Fax/Data	Service/SIM

The following table explains how the LED colors and blink rates indicate your device’s coverage and connection status.

LED Reference Table

	Power	Messaging	Phone /	Service /	Signal	Signal	Signal
			Fax	SIM	Strength 1	Strength 2	Strength 3
Off		No Messages	On Hook /		No GPS
			No WAN
Solid	AC / Batt	Voicemail	On-Hook / WAN	Service / 2G	1 Bar + GPS	2 Bars	3 Bars
	Normal
Slow	Batt Only	SMS		Service / 2.5 G	1 Bar	1 Bar	2 Bars
Fast		Both	On-Hook /	Service / 3G
			WAN Tx
Solid	AC / Batt		Off-Hook / WAN	Roam / 2G
	Charging
Slow	Low Batt		Off-Hook /	Roam / 2.5G
			No WAN
Fast			Off-Hook /	Roam / 3G
			WAN Tx
Solid	Batt fault		Off-Hook / WAN	No Service
Slow	Batt crit		Off-Hook /	PIN Locked
			No WAN
Fast			Off-Hook /	SIM Error /
				No SIM /
			WAN Tx
				Net Reject

Wi PATHTM SX7 11 User Guide