Setup Wireless WAN, Dhcp Settings | Telular SX7T, SX7M manual

Advanced Data Connection Options

DHCP Settings

DHCP Server (Ethernet only): Dynamic Host Configuration Protocol. Select Enable to allow the unit to receive IP address, subnet mask, default gateway,and other settings dynamically through a server.

Number of DHCP Users: Maximum number of connections allowed. (Default is 50.)

Client Lease Time: Amount of time new DHCP settings remain in effect. (Default of 0 minutes signifies 1 day [24 hours].)

Static DNS 1–3:Allows you to enter known fixed DNS (Domain Name System) addresses.

WINS: Allows you to enter a known fixed WINS (Windows Internet Name Service) address.

Currently Assigned: Click DHCP Clients Table to display currently connected DHCP client information.

Timezone: Shows currently assigned time zone (assigned by the network). Can be changed by user.

Time Server: Use to select time server for the unit. (Defaultis WirelessNetwork Time [NITZ].)

Setup > Wireless WAN

Connected

ABC Wireless

isp.abcwireless

The settings for Wireless WAN setup are covered in “Setting Up Your Wireless WAN Data Connection” on page 8.

Wi PATHTM SX7

23

User Guide

Image 25

Telular SX7T, SX7M manual Setup Wireless WAN, Dhcp Settings

Contents

Wi Pathtm SX7T Terminal and SX7M Modem User Guide Table of Contents Getting Started With the Wi Pathtm SX7 IntroductionYourWi PATHSX7 Components USB Cable a to B not pictured RJ-11 Phone Cable Tip Set Up Your SX7 To power outlet Ground Connector Screw Connect the SX7 to Your Computer Power Up the SX7 Connect to the Telular Device Manager Using the Telular Device Manager Telular Device Manager Overview Setting Up YourWireless WAN Data Connection For PSD Auto Connect, click Always On Data ConnectionThe Basics LED Reference Table Status LEDs Install the USB Drivers Using the USB Connection Option Connect the SX7 to Your Computer With a USB Cable Set Up a Dial-Up Networking DUN Connection USB Connection Option USB Connection Option Using the Voice Calling Features on Your SX7T Using the Voice and Fax Options SX7T Only For MT Call Type 3 select FAX Next Call or FAX Always Using the Fax Function on Your SX7T Phone/Fax Voice/Fax Programming Pstn Settings Basic Pots Setup Setup LAN Setup OptionsLAN Features Advanced Data Connection Options Dhcp Settings Setup Wireless WAN Setup Keep Alive Setup Ddns Setup SIM Network Routing Network OptionsRouter NAT off RIP Version Select v1 or v2 default Network Firewall/Filters Network DMZ Network Port Forwarding Admin Management Administration Options Admin Firmware Upgrade Admin Factory Defaults Status Router Status Options Status LAN Ethernet Status Status LAN USB Status Wireless WAN Status Pstn Basic Pstn Call Control Pstn Options Pstn Pots Setup Configuring TCP/IP Settings Advanced SettingsWindows XP Line Ring Glossary SX7 Connections An Overview WiPATH SX7 Rear Panel View and Connectors