For RJ-11 Jack Mode (4) select J1Voice, J2 FAXor J1 Voice, J2 Auto.
Click Save (5), and then click Restart (6) to save your settings and restart the SX7T.
2. Plug an RJ-11 cable into the Phone/Fax input on the back panel.
3. Connect the other end of the RJ-11 cable into your fax machine’sRJ-11 input jack.
4. If the fax machine has a handset, lift if off the receiver and listen for a dial tone.
(Depending on your fax machine, you mayalso press TALK,ON,Hook,orSpeaker.)
5. If you hear a dial tone, send a test fax to confirm your service is active.
Note
TheSX7T is onlycompatiblewith Group3 (G3) fax machinestransmittingat 7200or
9600bps/baud.
Pleaseconfirmyour SX7Tand fax machingsettingsbefore callingyour serviceprovideror
Telular TechSupport.
Phone/Fax
4
4
5566
Voice and Fax Options (SX7T Only)
Wi PATHTM SX7 18 User Guide