Advanced Data Connection Options, Setup Options | Telular SX7M

Advanced Data Connection Options

Advanced Data Connection Options

The following pages outline all the advanced programming options and settings available through the Telular Device Manager interface. For information about accessing and using the Telular Device Manager, please see “Using the Telular Device Manager” on page 6.

Note

The defaultsettings of theSX7accommodatemostcommonconfigurations.Manyof the advancedsettings should be implementedor supervisedbyqualifiedIT specialists.

Setup Options

Setup > LAN

As an alternative to the preferred Wireless WAN data connection, the SX7 offers LAN (Local Area Network) connectivity via the Ethernet port or via a USB connection (using Dial-Up Networking).

LAN Features

MAC Address: The unit’s MAC address (also the serial number). This cannot be changed.

IP Address: The address the unit uses to identify itself to the computer. (192.168.1.90 is the default.)

Subnet Mask: Identifies the subnet class on the network; class 3 (255.255.255.0) or class 4 (255.255.255.255).

Wi PATHTM SX7

22

User Guide

Image 24

Telular SX7M, SX7T manual Advanced Data Connection Options, Setup Options, Setup LAN, LAN Features

Contents

Wi Pathtm SX7T Terminal and SX7M Modem User Guide Table of Contents Introduction Getting Started With the Wi Pathtm SX7YourWi PATHSX7 Components USB Cable a to B not pictured RJ-11 Phone Cable Set Up Your SX7 Tip To power outlet Ground Connector Screw Power Up the SX7 Connect the SX7 to Your Computer Using the Telular Device Manager Connect to the Telular Device Manager Telular Device Manager Overview Setting Up YourWireless WAN Data Connection For PSD Auto Connect, click Always On Data ConnectionThe Basics Status LEDs LED Reference Table Using the USB Connection Option Install the USB Drivers Set Up a Dial-Up Networking DUN Connection Connect the SX7 to Your Computer With a USB Cable USB Connection Option USB Connection Option Using the Voice and Fax Options SX7T Only Using the Voice Calling Features on Your SX7T Using the Fax Function on Your SX7T For MT Call Type 3 select FAX Next Call or FAX Always Phone/Fax Pstn Settings Voice/Fax Programming Basic Pots Setup Setup Options Setup LANLAN Features Advanced Data Connection Options Setup Wireless WAN Dhcp Settings Setup Keep Alive Setup Ddns Setup SIM Network Options Network RoutingRouter NAT off RIP Version Select v1 or v2 default Network Firewall/Filters Network Port Forwarding Network DMZ Administration Options Admin Management Admin Factory Defaults Admin Firmware Upgrade Status Options Status Router Status LAN Ethernet Status Status LAN USB Status Wireless WAN Status Pstn Options Pstn Basic Pstn Call Control Pstn Pots Setup Advanced Settings Configuring TCP/IP SettingsWindows XP Glossary Line Ring WiPATH SX7 Rear Panel View and Connectors SX7 Connections An Overview