Statistics 9-11
You can delete the contents of a list in several ways:
¦With the CLRLIST instruction (page 9-13).
¦Through the MEMORY menu (Chapter 12).
¦In the STAT list editor, by pressing 7 to move onto the list
name and then pressing M ¸.
¦In the STAT list editor, by deleting each element.
¦On a command line, by entering 0!DIM listname.
To edit a list element:
1. Display the STAT list editor.
2. Move the rectangular cursor to the element you want to
change.
3. Press ¸ to switch to the editing context. Then:
¦Change the current value by inserting, deleting, or
typing over digits.
¦Press an entry key, such as a number or letter, to begin
an entry. This automatically clears the value.
¦Press M to clear the entire value and then enter a
new value.
Note: If you clear a value by mistake, you can
immediately press ¸ to restore the value at the
rectangular cursor.
4. Press ¸ to store the new value and move to another
element.
Note: You may enter an expression, which is evaluated when
you press ¸, 8, or 7.
Deleting a List
Editing a List
Element