9-12 Statistics
You can enter or edit an entire list by moving the cursor to a list name on the top
line of the STAT list editor and then pressing ¸. The bottom line displays
L
n
=L
n
×1, if there is data already in the list. Type any expression that returns a
list, and press ¸. The new list is displayed.
To enter an entire list:
1. Press A ¸. Enter several elements in L1.
2. Press 7 and 9 as many times as necessary to move the
cursor to the list name L2.
3. Press 2 ¢ p 2. This is the expression that will define
the elements in L2.
4. Press ¸ to define and display L2.
To replace an existing list:
1. Move the cursor to the list name L2. L2=L2×1 is displayed.
2. Enter a new expression to replace the existing values in
L2, 2 ¢ p 3, for example. Then press ¸. The
values in L2 are replaced, and the new values are
displayed.
Entering an
Entire List
Editing an Entire
List