Texas Instruments TMS320DM6446 DVEVM v2.0 manual Verify that the server firewall is turned off

Installing the Software

4)Perform the following commands to create a copy of the target file system with permissions set for writing to the shared area as <useracct>. Substitute your user name for <useracct>. If you installed in a location other than /opt/mv_pro_5.0, use your location in the cp command.

host $ cp -a /opt/mv_pro_5.0/montavista/pro/devkit/arm/v5t_le/target/* .

host $ chown -R <useracct> opt

5)Edit the /etc/exports file on the host Linux workstation (not the exports file on the target filesystem). Add the following line for exporting the filesys area, substituting your user name for <useracct>. Use the full path from root; ~ may not work for exports on all file systems.

/home/<useracct>/workdir/filesys *(rw,no_root_squash,no_all_squash,sync)

Note: Make sure you do not add a space between the * and the ( in the above command.

6)Still as root, use the following commands to make the NFS server aware of the change to its configuration and to invoke an NFS restart.

host $ /usr/sbin/exportfs -av host $ /sbin/service nfs restart

Note: Use exportfs -ravto re-export all directories. Use /etc/init.d/nfs status to verify that the NFS status is running.

7) Verify that the server firewall is turned off:

host $ /etc/init.d/iptables status

If the firewall is running, disable it:

host $ /etc/init.d/iptables stop

4-10