Texas Instruments TMS320DM6446 DVEVM v2.0 manual Contents

Contents

1 DVEVM Overview		1-1
This chapter introduces the DVEVM (Digital Video Evaluation Module) kit.
1.1	Welcome!	1-2
1.2	What’s in this Kit?	1-3
1.3	What’s on the Board?	1-4
1.4	What’s Next?	1-5

2 EVM Hardware Setup		2-1
This chapter tells you how to set up the EVM hardware.
2.1	Setting Up the Hardware	2-2
2.2	Connecting to a Console Window	2-6

3 Running the Demonstration Software			.3-1
This chapter explains how to run the software demos provided with the DVEVM kit.
3.1	Default Boot Configuration		.3-2
3.2	Starting the Standalone Demos		.3-2
3.3	Running the Standalone Demos		.3-4
	3.3.1	Shutting Down the Demos	.3-5
	3.3.2	About the Encode + Decode Demo	.3-6
	3.3.3	About the Encode Demo	.3-7
	3.3.4	About the Decode Demo	.3-8
	3.3.5	About the Third Party Menu	.3-9
3.4	Running the Demos from the Command Line		.3-9
3.5	Running the Network Demo		3-11

4 DVEVM Software Setup			4-1
This chapter explains how to use the software provided with the DVEVM kit.
4.1	Software Overview		4-2
	4.1.1	Command Prompts in This Guide	4-3
	4.1.2	Software Components	4-4
4.2	Preparing to Install		4-5
4.3	Installing the Software		4-5
	4.3.1	Installing the Target Linux Software	4-6
	4.3.2	Installing the DVSDK Software	4-7
	4.3.3	Installing the A/V Demo Files	4-8
	4.3.4	Installing the SoC Analyzer	4-9

vii