Installer Checklist
Final Check List
Rangetop correctly positioned in countertop recess. Specified clearances maintained to cabinet surfaces. Burner caps positioned properly on burner bases. All packaging material removed.
Electrical
For models with the electric griddle, a polarized and grounded 120VAC receptacle with 15 AMP over current protection is provided for service cord connection.
Operation
Flush Island Trim or Backguard attached according to instructions.
The griddle plate tilted slightly forward. (See “Griddle Tilt Adjustment (not all models)” on page 10.)
Gas Supply
Connection: 1/2” NPT with a minimum 3/4” diameter flex line.
If converting from natural to LP gas, refer to LP Conversion Instructions for details.
Manual gas shut off valve installed in an accessible location (without requiring removal of appliance).
Unit tested and free of gas leaks.
Bezels centered on burner knobs, and knobs turn freely.
Purge air from gas system by operating one of the top burners for several minutes.
Each burner lights satisfactorily, both individually and with other burners operating.
Burner grates are correctly positioned.
Installer
Write the model number and serial numbers (see “Data Rating Plate” on page 1 for location) in the Use and Care Guide. Leave the USE AND CARE GUIDE and INSTALLATION INSTRUCTIONS with the owner of the appliance.
To Clean and Protect Exterior Surfaces
The stainless steel surfaces may be cleaned by wiping with a damp soapy cloth. Any mild glass cleaner will remove fingerprints and smears.
Follow all cleaning by rinsing with clear water. Wipe dry with a clean soft cloth to avoid water marks. For discolorations or deposits that persist, use a
Use a stainless steel cleaner/polish to protect the finish and maintain appearance.
DO NOT allow salt solutions, disinfectants, bleaches or cleaning compounds to remain in contact with stainless steel for extended periods. Many of these compounds contain chemicals which could prove harmful. Rinse with water after exposure and wipe dry with a clean cloth.
Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making a counter opening. For the most detailed information, refer to the installation instructions accompanying this product or write THERMADOR® indicating the model number.
DO NOT allow deposits to remain for long periods of time.
DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface causing rust.
We reserve the right to change specifications or design without notice. Some models are certified for use in Canada. THERMADOR is not responsible for products which are transported from the U.S. for use in Canada. Check with your local Canadian distributor or dealer.
English 15
